4910 - Entryshield

EMI/RFI-shielded cable entry-system to mount, ground and shield several cables or bundles of cables simultaneously.

A shielded cable-entry system to mount, ground and shield several cables or bundles of cables simultaneously. The highly conductive, flexible EMC gasket between which the cables are entered into the enclosure guarantees excellent shielding performance between 1 MHz and 10 GHz.

Options (on request)

  • Watertight constructions
  • Flame-retardant gaskets
  • Chemical-resistant gaskets
  • Temperature-resistant gaskets
  • Stainless steel version


  • High shielding performance over a wide range of frequencies
  • Mounting within a few minutes
  • Very easy to add more cables later
  • Required preparations in the enclosure: only 1 rectangular recess
  • Standard or according to customer specifications

Integration of a cable-entry shield

You can integrate Entryshield 4910 easily into any enclosure. You should make a slot in your housing that is 36 mm in height (H in the technical drawing). The length of the slot depends on how many cables you want to carry in. Entryshield is a clip-on profile that can be attached easily by pressing it into position.

Cable entry shield is an entry system to mount, ground and shield several cables simultaneously
Cable-entry shield is an entry system to mount, ground and shield several cables simultaneously
Cable entry shield technical drawing
Cable-entry shield technical drawing

4915 - Entryshield instant version (turnkey implementation plate for direct mounting)

Entryshield instant version with Amucor gasket
Entryshield instant version with Amucor gasket as turnkey implementation
plate for direct mounting in your EMI shielded enclosure or Faraday cage.
EMI / RFI Shielded cable entry system | Entryshield instant version 4915
Entryshield instant version, technical drawing

We can deliver cable-entry shield as an turnkey implementation - we call this the Entryshield instant version. This instant version is a Mu-ferro plate of 100 x 200 mm, 2 mm thick, with the entry shield already mounted in this plate. The instant version is like a letterbox flap, only for entering EMI/RFI-shielded cables. This version is easy to fit into a EMI/RFI-shielded box, EMI/RFI-shielded room or Faraday cage.

For more details please see the technical drawing and the picture above.

Entryshield instant version options (on request)

  • With Amucor EMI gasket
  • Made according to your drawing
  • Custom drill pattern

* Larger versions or a version according to your drawing are available on request.


Would you like to...

To get a quotation for Entry shield within 24 hours fill in the form below.

Select an option:
4910 : Entryshield (Profile)
4915 : Entryshield (Instant version)
Please specify the length in mm
* Note: The red blocks are required
Products related to Entry shield

Flexible cable shield

Flexible shielding tube

Connector gasket

Shielded connector hoods

Ready-made sleeve


Cable grounding clamps

High performance Cable entry shield

Flat cable connector shield

Cable shield tie-wraps

Mu-ferro tape

High performance EMC cable glands

Cable connector shields

EMI/RFI cable entry glands

HDMI cable connector shield

New FREE engineering manual

Reservation in 5 sec.

Make a reservation for our new 300+ pages engineering manual coming next month

New EMC engineering manual