Cable-entry shield

Series

Specify the length in mm.
4910 and 4915 EMI/RFI cable-entry shield

A shielded cable-entry system for mounting, grounding and shielding several cables or cable bundles simultaneously. The cables are entered between highly conductive, flexible EMC gaskets. The system provides shielding performance between 1 MHz and 10 GHz. The standard plate material is galvanized steel.

Choose the 4910 clip-on profile for integration into your enclosure or the 4915 instant version for direct mounting.

1 MHz to 10 GHz

Shielding over a wide frequency range.

Fast mounting

Can be mounted within a few seconds.

Easy to expand

Cables can be added later.

One rectangular recess

Only one enclosure opening is required.

4910-4915 - Cable-entry shield - Shielding effectiveness (dB)

Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee

Choose your version
4910 Entryshield clip-on EMI RFI cable-entry profile
4910 Entryshield profile

The 4910 Entryshield is a clip-on profile for integration into an enclosure.

  • Requires a 36 mm-high slot
  • Slot length depends on the number of cables
  • Pressed directly into position
  • Suitable for integration into your own enclosure
4915 Entryshield instant version with Amucor EMI gasket
4915 Entryshield instant version

The 4915 Entryshield is a turnkey version with the cable-entry shield already mounted in a 2 mm galvanized plate.

  • For direct mounting
  • Suitable for shielded enclosures
  • Suitable for shielded rooms
  • Suitable for Faraday cages
4915 options on request

Larger versions and versions manufactured according to your drawing are available on request.

Amucor EMI gasket
Made to your drawing
Custom drill pattern
Larger versions
Integrating the 4910 Entryshield

Make a rectangular slot in the enclosure with a height of 36 mm. The required slot length depends on the number and size of the cables.

The 4910 Entryshield clip-on profile is installed by pressing it directly into position.

  • One rectangular enclosure opening
  • 36 mm slot height
  • Variable slot length
  • Clip-on installation
4910 Entryshield clip-on cable-entry profile installation drawing
Direct mounting of the 4915 Entryshield

The 4915 instant version is supplied with the Entryshield already mounted in a 2 mm Mu-ferro plate.

This ready-to-install version can be mounted directly in EMI/RFI-shielded enclosures, shielded rooms and Faraday cages.

  • Pre-assembled galvanized mounting plate
  • Direct bolt-on installation
  • Suitable for shielded enclosures
  • Suitable for shielded rooms and Faraday cages
4915 Entryshield instant version mounting dimensions and technical drawing
4930 high-performance cable-entry system

For higher shielding applications or larger numbers of cables in limited space, the 4930 high-performance cable-entry system can be used.

The electrically conductive beryllium-copper contact plate has small pointed fingers that make contact with the cable shield.

  • Suitable for power cables
  • Suitable for signal cables
  • Can accommodate water supply lines
  • Can accommodate waveguides
  • Designed for applications with limited installation space

View the 4930 cable-entry system

4930 high-performance EMI RFI cable-entry shielding system
Request a 4910 or 4915 cable-entry shield

Send us the required version, number of cables, cable dimensions and enclosure dimensions. Custom plates and drill patterns are available on request.

Select a version above and complete the request form.

More results