High-performance shielding cable entry system 4930
Shielding, grounding and attaching of cables to and from the equipment in your shielded enclosure
A shielded cable going into or out of the EMI/RFI-shielded housing has to make 360° contact, i.e. around the jacket of the shielded cable, with the EMI/RFI-shielded housing. For cables without a shielding jacket, Power or signal line filters should always be installed; otherwise the cable will act as an antenna.
For throughput of larger numbers of cables in a situation where space is limited, it makes sense to use an EMI/RFI-shielded cable entry system. Power and signal cables, as well as water supply lines and waveguides can be accommodated in the cable entry system. The electrically conductive beryllium-copper contact plate with small pointed fingers ensures good contact with the cable shield, which guarantees good shielding performance.
- Also available in fireproof, gastight or watertight versions
- The shielding cable entry system can be provided with additional dummy holes on the inside plate and the beryllium-copper contact plate. The outer plate remains closed to keep shielding performance high. You can add more cables later by drilling a hole in the outside plate. We will mark the positon of the dummy holes on the outer plate in advance.
- This system facilitates letting many cables enter into a small area without the indiviual use of (expensive) cable glands.
- Cable diameters can be between 3 - 28 mm. Other diameters on request.
To get a quick quote please send us a list of cable diameters and we will submit a proposal. You can describe your specifications or the size of the entry plate.
This High-performance shielding cable entry system can also be made according to the customer's drawing.
If you want a quote for a High-performance cable shielding system, please send an email to [email protected]com.