Thermal pads

thermal pads icon 1

Series

Specify the thickness in mm. Thicknesses available from 0,5 to 5 mm. Other thickness on request.
Specify the width in mm.
Specify the length in mm.

Thermal interface material is used to fill the gaps between thermal transfer surfaces such as between microprocessors and heat sinks, in order to increase the efficiency of thermal transfer. There is usually air in these gaps, and air is a notoriously poor conductor. The interface material is easy to handle and is not messy. It is available in solid and liquid form and comes in various thicknesses.

Thermal conductivity

The thermal conductivity of the interface material determines its thermal performance to a large extent. The high thermal conductivity of this product guarantees sufficient heat transfer, resulting in a better cooling solution and the desired heat dissipation.

This film, wih its excellent thermal and electrical properties, is especially suitable for high-power applications. The material performs so well that it can be used reliably in densely packed electronic applications.

Properties
  • Good insulation properties
  • Heat conducting
  • Good compressibility
  • Flexible
  • Environmentally friendly
Applications
  • RD-RAM memory chips
  • Heat pipe thermal solutions
  • automotive engines
  • control units
  • plasma supply panels
Benefits
  • Temperatures up to 200 °C
  • High insulation properties
  • Supplied as sheets, strips or die-cuts
  • Thicknesses of 0.5 to 5 mm (see table below)
Part number Color Thermal
resistance		 Thermal impedance Thermal
conductivity		 Breakdown voltage Dielectric breakdown Ed; ac Volume resistivity Dielectric loss factor tan δ Dielectric constant εr Hardness Young´s modulus Application temperature Density Available thickness
    K/W °Cmm²/W
Kin²/W		 W/mK KV KV/mm Ωm     Shore 00 N/cm² °C   mm
1150-125 Dark orange 0.8 322
0.5		 1.5 6.0 12.0 6.1 x 1010 1.5 x 10-1 4.3 10 - 25 24 -40 to +180 2.0 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0
1150-128 Pink / dark orange 0.8 322
0.5		 1.5 6.0 12.0 1.8 x 1012 1.0 x 10-3 2.3 10 - 25 67 -40 to +180 1.9 0.5, 2.5, 4.5
1150-200 Pink/yellow 1.2 480
0.75		 1.0 8.0 16.0 1.0 x 1011 1.5 x 10-3 3.9 10 - 20 22 -60 to +200 1.61 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0
1150-225 Orange 0.6 240
0.37		 2.0 6.0 12.0 2.2 x 1011 1.0 x 10-3 3.6 30 - 45 58 -40 to +180 1.65 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0
1150-228 Pink / orange 0.6 240
0.37		 2.0 6.0 12.0 2.8 x 1011 1.0 x 10-3 2.5 30 - 45 160 -40 to +180 1.95 0.5, 1.0
1150-235 Yellow 0.6 240
0.37		 2.0 6.0 12.0 1.7 x 1011 2.0 x 10-2 3.7 25 - 40 32 -40 to +200 1.65 0.5, 1.0, 1.5, 2.0, 2.5, 4.0, 5.0
1150-238 Pink / yellow 0.6 240
0.37		 2.0 6.0 12.0 4.7 x 1011 1.0 x 10-3 1.9 25 - 40 122 -40 to +200 1.65 0.5, 1.0, 2.0, 3.0, 4.5
1150-320 Yellow 0.5 147
0.23		 2.5 5.0 10.0 6.8 x 1011 2.9 x 10-2 3.4 25 - 38 32 -40 to +180 1.69 1.0, 1.5, 2.0, 3.0, 4.0, 4.5
1150-450 Brown 0.27 108
0.18		 4.5 5.0 10.0 3.6 x 1012 3.0 x 10-3 2.5 65 - 75 95 -40 to +180 1.32 0.5, 1.0
1150-500 (EOL) Brown 0.25 100
0.15		 5.0 1.0 2.0 1.0 x 1011 1.5 x 10-3 3.9 65 - 75 70 -60 to +200 1.33 2.0
1150-525 Violet 0.22 89
0.14		 5.5 1.25 2.5 1.6 x 1013 1.0 x 10-3 2.7 50 - 65 99 -40 to +180 1.18 0.5, 1.0, 1.5, 2.0, 2.5, 3.0
1150-550 Light grey - 0.22 6.0 >5.0 15.5 6.0x1013 - - 55-65 - -58 to +200 - 0.5, 1.0, 1.5, 2.0, 2.5
1150-600 (EOL) Grey 0.2 80
0.12		 6.0 1.5 3.0 1.7 x 1010 2.0 x 10-3 2.5 60 - 75 77 -60 to +180 1.28 1, 1.5
1150-U110
(silicon free) on request		 Brown 1.2 - 2.0 - 8.0 - - - 60-75 - -40 to +110 1.87 0.5, 2.0
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
Contact
More results