Conductive Aluminium tape

Aluminium tape especially for EMI/RFI shielding/screening in aluminium housings and frames to prevent galvanic corrosion.

Aluminium tape was developed especially for EMI/RFI shielding/screening in Aluminium housings and frames to prevent galvanic corrosion.

We not only produce our Aluminium tape on rolls, but also die-cut according to the customer's drawing on strips or in pieces (as stickers), both with or without self-adhesive.

Aluminium tape technical drawing
3203 Aluminium tape, technical drawing

Technical specification and part numbers

Part number
(with conductive adhesive)
Part number
(with standard adhesive)
Foil material Aluminium
Surface Shiny
Foil thickness 0.040 mm
Total thickness 0.065 mm
Adhesive Synthetic conductive resin
Adhesive performance 4.5 N/cm
Tensile strength 25 N/cm
Temperature resistance 155 °C
El. resistance through adhesive 0.003 Ohm
Standard roll widths (mm)* 10, 25, 50, 100
Roll lengths* 16.5 m
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
Aluminum tape EMI RFI shielding housings frames
Aluminium tape for EMI/RFI shielding of Aluminium housings and frames
Conductive aluminium tape cut large quantity according customer drawing
Thanks to our automated CNC cutting system we can cut Aluminium tape in large quantities and according to the customer's CAD drawing
Aluminium tape cut any width
Aluminium tape can be cut to any width


Would you like to...

To get a quotation for Aluminium tape within 24 hours fill in the form below.

Select an option:
3203 : Aluminum tape with conductive adhesive
3303 : Aluminum tape with standard adhesive
Specify the width of the tape in mm
Specify the length of the tape in meters
* Note: The red blocks are required