Buy our

Oriented wire shield

oriented wire shield main 1


Specify the desired width in mm. max. 228 mm.
Specify the desired length in mm. Max. 900 mm.

Oriented wire shield 5711 - 5722 is a composite gasket material consisting of a large number of small wires embedded and bonded in solid or sponge silicone, or fluorosilicone elastomer for oil resistance.

The wires provide excellent conductivity to establish EMI/RFI shielding.

The material is used in military, industrial and commercial products requiring EMI suppression, grounding, or static discharge. It is very suitable for applications where an environmental or pressure seal is required.

The sponge version is used in cases where the joint is very uneven, or if lower closure forces or greater compressibility are required.


We produce sheets of max. 228 x 900 mm , from which we can then cut gaskets without interruptions. Bigger gaskets can be welded/joined together in order to prevent waste of material.

Custom compositions are available on request, contact us with your a drawing and with the desired dimensions.

  • Temperatures up to 220 °C
  • High shielding performance
  • Water sealing up to 10 meters
  • Pressure resistant
  • Salt spray/chemical resistant
  • Fluorosilicone rubber for fuel/oil resistance
  • Supplied as sheets, strips or die-cuts

Available thicknesses

0.81, 1.13, 1.38, 1.57, 2.40, 3.18, 3.96, 4.78, 6.35 mm.
Other thicknesses on request.

Oriented wire shield according drawing
Oriented wire shield can be CNC cut according to your drawing into any desired shape and size
Oriented wire shield roll 900 mm
Oriented wire shield can be supplied on a roll of 900 mm length
Oriented wire shield various type metal wire galvanic corrosion
Oriented wire shield can be supplied with various types of metal wires in order to prevent galvanic corrosion

Shielding performance
Oriented wire shield Shielding performance attenuation

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Technical drawing
Oriented wire shield according drawing

Part numbers
Material Part number
Solid silicone with monel wire 5711
Solid silicone with aluminium wire 5712
Solid fluorosilicone with monel wire 5713
Sponge silicone with monel wire 5721
Sponge silicone with aluminium wire 5722

Technical specifications
Material Solid silicone with monel wire Solid silicone with aluminium Solid fluorosilicone with monel wire Sponge silicone with monel wire Sponge silicone with aluminium wire
Part number 5711 5712 5713 5721 5722
Color Gray Gray Blue Gray Gray
Wire count/ sq. inch 900 900 900 900 900
Compression set 25% 25% 25% 25% 25%
Closing force (PSI) 25-100 25-100 25-100 5-50 5-50
Fuel/solvent resistant No No Yes No No
Temperature (°C) -65/200 -65/200 -55/200 -65/200 -65/200

Technical specifications
Elastomer Silicone or fluorosilicone
Conductive filler Monel wire, aluminium wire
ROHS compliance Yes
Corrosion resistance Yes
UV resistance Yes
Oil resistance Fluorosilicone type only
Fuel resistance Fluorosilicone type only
IP rating  Yes
Conductive adhesive (conductive PSA)
Property Unit Outcome Test method
Surface resistance Ω/sq <0.10 MIL-DTL-83528C
Adhesive strength G/25mm 850 ASTM D 3330
Conductive PSA - Acrylic + Ni -
Liner - Paper, film -
Happy to help
Allowed maximum size is 20 MiB. You can upload multiple files