Check our

EMC-IP gasket with controlled compression stops

emc ip gasket with controlled compression stops main 1

Series

Allowed maximum size is 20 MiB. You can upload multiple files

This gasket is used for screwed connections for EMI and EMP protection. The water seal is made out of flame retardant neoprene foam. In the water seal are not only holes for bolts but also holes to make the foam more easy to compress. This makes it so that it can be used to screw thinner plates together without bending.

Around the bolt holes are compression stops to prevent the gasket overstretches. This makes it possible so that with a torque control the gasket is under exactly the right stress for water and EMI sealing during mounting. The bolt holes can be made at any distance. The compression stops can be out of metal or plastic. The thickness and width can change as well as the reduction of the compression force, without influence on the shielding capacities.


Technical drawing
EMC-IP gasket with controlled compression stops technical drawing
EMC-IP gasket with compression stops cores silicone neoprene full metal
Knitted mesh core

The core of the knitted mesh material can be made in:

  • Silicone
  • Neoprene
  • Full metal

Knitted mesh Shielding performance

Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.


Round core
EMC-IP gasket with compression stops knitted mesh round
D (mm) or D x d (mm)
1.6 4.8 x 3.2 9.5 x 6.4
2.4 6.4 11.1
3.2 6.4 x 3.2 11.1 x 8.0
3.2 x 1.6 7.9 12.7
4.0 8.0 x 4.8 12.7 x 9.5
4.8 9.5 14.9 x 11.1
Rectangular & square
Knitted mesh core rectangular square
W x H (mm)
3.2 x 1.6 9.5 x 3.2 19.1 x 12.7
3.2 x 2.4 9.5 x 4.8 20 x 6
3.2 x 3.2 9.5 x 6.4 20 x 8
4.0 x 3.2 12.7 x 6.4 20 x 10
4.8 x 2.4 12.7 x 9.5 20 x 12
4.8 x 3.2 12.7 x 12.7 20 x 20
4.8 x 4.8 15 x 6 25 x 6
6.4 x 1.6 15 x 8 25 x 8
6.4 x 2.4 15 x 10 25 x 10
6.4 x 3.2 15 x 12 25 x 12
6.4 x 4.8 15 x 15 25 x 18
6.4 x 6.4 15.9 x 9.5 25 x 20
Neoprene foam (base material)

The base material of the gasket is made of neoprene that can be ordered in different widths and lengths. The thicknes of the foam can be ordered in: 1, 2, 3, 4, 5, 6, 7, 8, 10 and 12 mm.

EMC-IP gasket with compression stops technical drawing

If you send us a drawing, please include the dimensions shown above. For a inquiry send a email to [email protected]

Happy to help
Allowed maximum size is 20 MiB. You can upload multiple files