8210 series Flat cable connector shield

Easy to be stuck to any connector to create a high shielding performance flat cable

A flat cable in electronics housing often leads to interference. Previously we already developed the 4700S series ready-made sleeve (EMI screening sleeve) for flat cables that allows easy cable routing during assembly.

Now we have developed a flat cable connector shield that is very easy to be stuck to any connector of a flat cable. With this shield the cable including the connector can be fully shielded to get the best shielding performance.

Most sizes are available from stock but the shield can be produced in any dimension. We only need to know your type of connector so that we can produce the shield in the right dimensions.

Shielding performance can even be improved using optional grounding connections.


Benefits

  • Very high shielding performance
  • Available for any connector
  • Easy to mount
  • Good connection to the shield of the cable

Options (on request)

  • Can be equipped with grounding strip for better performance
  • Performed in an Amucor execution

Standard part numbers

Based on availability of standard connectors, the number of conductors is usually restricted to a few values, These include 4, 6, 8, 9, 10, 14, 15, 16, 18, 20, 24, 25, 26, 34, 37, 40, 50, 60, 64 and 80.

Part number Connector
8210-4 4
8210-6 6
8210-8 8
8210-10 10
8210-14 14
8210-15 15
8210-16 16
8210-18 18
8210-20 20
8210-24 24
8210-25 25
8210-26 25
8210-34 34
8210-37 37
8210-40 40
8210-50 50
8210-60 60
8210-64 64
8210-80 80

Please note, also suitable for 7-pin serial ATA cable and 15-pin power connector for Serial ATA. Every other connector shield can be customized within a day.

Flat cable without EMI shielding
Flat cable without EMI shielding
Step 1. Flat cable connector shield stuck on the connector
Step 1. Flat cable connector shield stuck on the connector
Step 2. Release the lines so that you can make connection with the 4700S series Ready made sleave or any other cable shielding material
Step 2. Release the lines so that you can make connection with the 4700S series Ready made sleave or any other cable shielding material
Step 3. After the cable shielding material like the 4700S series Ready made sleave is mounted the cable will be fully shielded
Step 3. After the cable shielding material like the 4700S series Ready made sleave is mounted the cable will be fully shielded
Step 3. After the cable shielding material like the 4700S series Ready made sleave is mounted the cable will be fully shielded
Please note. This is a example image of a 8215 series HDMI cable connector shield stuck on a HDMI cable. Please note, The cable in this example is fully shielded, so the cable itself is also packed with conductive textile. Click here for more information

Would you like to...

To get a quotation for Flat cable connector shield within 24 hours fill in the form below.

Series
Based on availability of standard connectors, the number of conductors is usually restricted to a few values, These include 4, 6, 8, 9, 10, 14, 15, 16, 18, 20, 24, 25, 26, 34, 37, 40, 50, 60, 64 and 80
* Note: The red blocks are required
Products related to Flat cable connector shield

Flexible cable shield

Flexible shielding tube

Connector gasket

Shielded connector hoods

Ready-made sleeve

Wrapshield

Entry shield

Cable grounding clamps

High performance Cable entry shield

Cable shield tie-wraps

Mu-ferro tape

High performance EMC cable glands

Cable connector shields

EMI/RFI cable entry glands

HDMI cable connector shield