Please select a product below
Conductive foils, fabrics and sheet materials for EMI shielding. These materials are used to shield plastic housings and enclosures against undesirable electromagnetic signals. Please select one of the EMI-shielding foils below to continue
Many EMI problems can be solved easily by the use of conductive foils, fabrics or sheets. Some of the most commonly used materials are Mu-copper foil, reinforced Amucor foil and highly conductive textile.
All of these materials can be produced with or without (conductive) self-adhesive and an optional insulation layer.
In addition, all materials can be cut according to CAD drawing to any desired shape and size.
Shielding performance of different foils
|Field||Frequency||Mu-copper foil||Amucor foil||Conductive textile foil||Mu-ferro foil|
|0.12 mm thick||0.04 mm thick||0.10 mm thick|
|E||1 MHz||125 dB||121 dB||115 dB||Developed for low-frequency (LF) magnetic field shielding|
|E||10 MHz||101 dB||110 dB||108 dB|
|E||100 MHz||120 dB||103 dB||102 dB|
|E||400 MHz||115 dB||98 dB||92 dB|
|P||1 GHz||110 dB||92 dB||90 dB|
|P||10 GHz||120 dB||85 dB||80 dB|
|These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
EMI shielding foils (please select one)
Mu-copper foil shows superb shielding performance, also at low frequencies, can be soldered, and can be folded into the right shape easily.
Reinforced Amucor foil is both cost-effective and heat resistant. This thin foil can be applied easily to any surface or housing shape.
Conductive textile with self-adhesive can be applied easily to plastic housings to cover non-standard forms and shapes.
Mu-ferro foil and tape has been developed for shielding low-frequency (LF) magnetic fields.