Thermal grease

1100

Series

Thermal grease 1100 is a ceramic-filled single-component silicone with high thermal conductivity. The non-cross linked thermal compounds will not dry out and the silicone components do not leak out of the compound. The silicone-free thermal compound 1100-12 consists of synthetic, thermal polymer and is suitable for fast and effective heat dissipation. The paste is particularly suitable for silicone-sensitive applications.

The long-term stability of our 1100 Series guarantees full functionality during the entire lifetime of the product. Under normal application conditions Thermal grease will not cure, dry out, or melt. Special storage of Thermal grease is not required and it can be stored without special conditions for up to 12 months. If any separation of the filler materials is noted, the 1100 Series must be mixed thoroughly before use.

Silicone-free version

The silicone-free Thermal compound 1100-12 consists of synthetic, thermal polymer and is suitable for fast and effective heat dissipation. This paste is particularly suitable for silicone-sensitive applications. Its long-term stability guarantees full functionality during the entire lifetime of the product. Under normal application conditions the 1100-12 silicone-free compound will not cure, dry out, or melt.

Storage

Special storage is not required for our Thermal grease, so it can be stored under normal climate conditions for up to 12 months. If any separation of the filler materials is noted, the 1100 Series must be mixed thoroughly before use.

Properties Unit 1100-98 1100-12
Colour   Grey Silver
Compound   soft / pasty
Thermal properties
Thermal resistance Rth K/W 0.0100 0.0060
Thermal impedance Rti °Cmm²/W
KIN²/W		 4.1
0.0064		 2.2
0.0033
Thermal conductivity W/mK 6.0 10.0
Electrical properties
Electrical conductivity
(according to DIN 51412-1)		 pS/m 0 53
Mechanical properties
Measured thickness (+/- 10%) mm 0.025 0.025
Physical properties
Application temperature °C -60 to +200 -60 to +150
Density g/cm³ 2.2 1.4
Viscosity* Pas 110 - 150 30-60
Total mass loss (TML) Ma.-% < 1.5 < 0.1
Possible thickness mm Variable Variable
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
*Shear rate 4s-1 / 25 °C
Contact
More results