P-shaped EMI shielding profile

p shape emi shielding gaskets

Series

Specify the width of the gasket in mm
Specify the height of the gasket in mm
If you want the gasket with a water seal, then specify the width of the water seal in mm
Specify the length (mm) Max. length 2400 mm. Others on request. Keep small for economic transport

7200 series P-shaped EMI shielding gaskets consists of a P-shaped closed cell foam core which is covered with a conductive fabric with a copper-nickel metal coating (material code T) or highly conductive Amucor foil (material code A).

P-shaped EMI shielding gasket comes with a self-adhesive strip for easy mounting.

The version with highly conductive Amucor foil (material code A) is designed specifially to be combined with aluminium and zinc-plated steel.

Our 7200 series P-shape EMI shielding gaskets continuous strip gaskets have excellent shielding effectiveness (SE), high durability, low compression set and low resistance.


P-shape-EMI-shielding-gaskets-technical-drawingaanpassen

There is a square and a round shape available. The width of the bulb is the same as the p-shape height.


Part number Width (mm) Height (mm)
7200-8-3 8 3
7200-8-4 8 4
7200-10-4 10 4
7200-10-6 10 6
7200-12-4 12 4
7200-12-6 12 6
7200-12-8 12 8
7200-14-6 14 6
7200-14-8 14 8
7200-16-8 16 8

Custom sizes on request. Please contact us for more information.

Applications
  • Displays
  • Metal housings
  • Switching cabinets
  • Depending on the application an IP54 protection class could be reached, that means with the use of the shielding gasket a protection against dust (index 5) and protection against splashed water (index 4) can be accomplished

Characteristics

Conductive fabrics with Ni/Cu-layer. A neoprene core
(elastomer) covered with electrically conductive fabric

  • Shielding effectiveness: > 85 dB attenuation from 20 MHz to 10 GHz
  • Electrical Resistance: < 0.1 Ohms/Sq
  • Compression Deflection: < 1 lb/in
  • Compression Set: 15-19%
    •  15% at 21 °C (70 °F)
    • 19% at 70 °C (158 °F)
  • Service Temperature -40 °C (-40 °F) to 70 °C (158 °F)

Comments
  • The 7200 series P-shaped EMI shielding gaskets was developed to solve diverse EMI/RFI situations where a lightweight solution with excellent shielding properties and surface conductivity where required.
  • Shielding of over 80 dB @ 100 MHz can be reached very easily by using these shielding gaskets.
  • 7200 series P-shaped EMI shielding gaskets have the following composition: Neoprene, enclosed in an electro conductive fabric weaved from nickel-copper-polyester.
  • All standard profiles are self-adhesive and have a release liner. Non-conductive adhesive tape is used as standard.
  • Customer-specific lengths and stamped out patterns can be carried out on request.
Contact
More results