Buy our

Clip-on gasket all shapes

clip on gasket all shapes

Series

Please specify the part number from the tables below

This easily mounted clip-on gasket is composed of two layers: a sponge rubber water seal, and an EMI-shielding side of highly conductive, wear-resistant metalized fabric. The gasket is very flexible due to the hollow rubber, ensuring a low closure force. The gasket is assembled without tools, simply by manually pressing the section onto the metal flange of your enclosure. Different sizes are available on request. The gasket can be bent in either direction (it can not be bent into a right angle, but it can form a rounded corner with a very small radius). Temperature ranges from -40 to +110 °C. A flame retardant version (UL94 V0) is also available.

Shielding performance

Shielding effectiveness depends on the surface, the shape of the gasket, and the materials used.

Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Temperature resistance

An EPDM core with an operating temperature up to 100 °C and good resistance to UV, water, and acids make the clip-on shielding gaskets the right choice for outdoor applications.

Applications

Special shapes and materials excel in dynamic or high cycling applications such as Faraday cage doors or access panels with low compression rates and very limited compression set.


Available versions

The clip-on range comes in three flavors:

  • Type W series (Clip-on shielding gasket with water seal)
  • Type F series (Fully wrapped EMI/RFI-shielding gasket)
  • Type H series (For heavy-duty applications, for example, military)
clip-on gasket EMI RFI shielding shapes conductive textile knitted wire mesh

Type W series

(Clip-on shielding gasket with water seal)

clip-on gasket EMI RFI shielding gasket W series with water seal

The type W clip-on gasket series has been specially designed to provide environmental (water) sealing as well as EMI shielding for outdoor electronics and telecom cabinet manufacturers. The conductive textile is wrapped around one half of the gasket, dividing it into two parts: one part for electrical conductance and EMI shielding (made of highly conductive textile), and the other part for water sealing. The half-wrapped conductive textile provides over 96 dB of broadband noise attenuation which is crucial for mid- to high-range shielding applications.

Type F series

Fully wrapped EMI/RFI-shielding gasket)

clip-on gasket EMI RFI shielding gasket F series conductive textile

The type-F clip-on gasket series has been specially designed to provide both EMI shielding and electrical conductivity. The conductive textile is wrapped around the entire gasket, resulting in higher shielding performance than type W (half-wrapped version) - only at the expense of water resistance.

Type H series

(For heavy-duty applications, for example, military)

 clip-on gasket EMI RFI shielding gasket H series knited wire mesh

The type H clip-on gasket series has been specially designed for heavy-duty applications; in addition to EMI shielding, it also provides low-frequency magnetic shielding. The type H series is covered with highly conductive metal cladding that is outdoor proof and suited for harsh environments, making this gasket type suitable for military, medical and all other applications were high demands are made on the EMI shielding in the magnetic low-frequency area. 


Standard versions
  clip-on gaskets 6580 big side clip-on shielding EMI EMP gasket standard clip-on gaskets 6585 small clip-on shielding EMI EMP gasket standard clip-on gaskets 6590 big cli-on shielding EMI EMP gasket standard clip-on gaskets 6595 side clip-on shielding EMI EMP gasket standard
Partnumber 6580 6585 6590 6595
Available types W, F, H W, F, H W, F, H W, F, H
Clamping range 1-4 mm 0.5-2 mm 1-3 mm 1-2 mm
Profile material PVC quality 911V5 ALD EPDM quality ES 60 EPDM quality ES 60 PVC quality 911V5 ALD
Bulb material EPDM quality EP 082 EPDM quality ES 06 EPDM quality ES 06 EPDM quality EP 082
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

Conductive flexible edge protector

The gasket is designed to slide easily over metal flanges to help reduce installation costs and is a good choice for retrofit applications.

Applications
  • Connecting plates
  • ESD (static discharge)
  • EMI shielding
Benefits
  • Easy gasket installation
  • Resistance to heat, humidity, salt fog, corrosion and rain

* The red line is an indication of the conductive layer.

  clip-on gasket EMI RFI shielding gasket 6501 clip-on gasket EMI RFI shielding gasket 6502 clip-on gasket EMI RFI shielding gasket 6503 clip-on gasket EMI RFI shielding gasket 6504
Partnumber 6501 6502 6503 6504
Available types F, H F, H  F, H  F, H 
Clamping range 1 mm 1-2 mm 1-3 mm 6-8 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD
Bulb material - - - -
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6505 clip-on gasket EMI RFI shielding gasket 6506 clip-on gasket EMI RFI shielding gasket 6507 clip-on gasket EMI RFI shielding gasket 6508
Partnumber 6505 6506 6507 6508
Available types F, H  F, H  F, H  F, H 
Clamping range 1-4 mm 1-3 mm 1-4 mm 1-3 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD
Bulb material - EPDM quality EP 082 - -
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6509 clip-on gasket EMI RFI shielding gasket 6510 clip-on gasket EMI RFI shielding gasket 6512 clip-on gasket EMI RFI shielding gasket 6513
Partnumber 6509 6510 6512 6513
Available types F, H  F, H  F, H  F, H 
Clamping range 4-6 mm 9-12 mm 18-20 mm 1-2 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD
Bulb material - - - -
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6514      
Partnumber 6514      
Available types F, H       
Clamping range 2-3 mm      
Profile material PVC quality 911V5 ALD      
Bulb material -      
Assembly insert Steel 1.0347      

Sealing section

This combination of materials decreases the number of gaskets needed per cabinet. This makes the sealing section an economic solution for application where an environmental seal as well as EMI shielding is needed.

Features
  • High-performance solution
  • Very cost-efficient solution

* The red line is an indication of the conductive layer.

  clip-on gasket EMI RFI shielding gasket 6521 clip-on gasket EMI RFI shielding gasket 6522 clip-on gasket EMI RFI shielding gasket 6523 clip-on gasket EMI RFI shielding gasket 6524
Partnumber 6521 6522 6523 6524
Available types F, H  W, F, H  W, F, H  W, F, H 
Clamping range 1-4 mm 1-4 mm 1-4 mm 1-2 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD
Bulb material EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6525 clip-on gasket EMI RFI shielding gasket 6526 clip-on gasket EMI RFI shielding gasket 6527 clip-on gasket EMI RFI shielding gasket 6528
Partnumber 6525 6526 6527 6528
Available types W, F, H W, F, H W, F, H W, F, H
Clamping range 1-4 mm 1-4 mm 1-4 mm 1-2 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD
Bulb material EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6529 clip-on gasket EMI RFI shielding gasket 6530 clip-on gasket EMI RFI shielding gasket 6531 clip-on gasket EMI RFI shielding gasket 6532
Partnumber 6529 6530 6531 (on reauest) 6532
Available types W, F, H W, F, H W, F, H W, F, H
Clamping range 1-4 mm 1-4 mm 2-4 mm 2-4 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD EPDM quality ES 60 PVC quality 911V5 ALD
Bulb material EPDM quality EP 082 EPDM quality EP 082 EPDM quality ES 06 EPDM quality EP 082
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6533 clip-on gasket EMI RFI shielding gasket 6534 clip-on gasket EMI RFI shielding gasket 6535 clip-on gasket EMI RFI shielding gasket 6536  
Partnumber 6533 (on request) 6534 (on request) 6535 (on request) 6536 (on request)  
Available types W, F, H  W, F, H W, F, H W, F, H  
Clamping range 2-4 mm 2-4 mm 1-4 mm 1-2 mm  
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD  
Bulb material EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082  
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347  

  clip-on gasket EMI RFI shielding gasket 6537 clip-on gasket EMI RFI shielding gasket 6538 clip-on gasket EMI RFI shielding gasket 6539
Partnumber 6537  (on request) 6538 6539
Available types W, F, H W, F, H W, F, H
Clamping range 2-4 mm 1-4 mm 1-4 mm
Profile material PVC quality 911V5 ALD PVC quality 911V5 ALD PVC quality 911V5 ALD
Bulb material EPDM quality EP 082 EPDM quality EP 082 EPDM quality EP 082
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347

Conductive edge protector

This is a very rigid profile, used to protect sharp edges from damaging and still preserve the electrical conductance. This type is also suitable for connecting two steel plates or for static discharge.

* The red line is an indication of the conductive layer.

  clip-on gasket EMI RFI shielding gasket 6540 clip-on gasket EMI RFI shielding gasket 6541 clip-on gasket EMI RFI shielding gasket 6542 clip-on gasket EMI RFI shielding gasket 6543
Partnumber 6540 6541 6542 6543
Available types F, H  F, H  F, H  F, H 
Clamping range 0.5-2 mm 2-5 mm 1.2-1.8 mm 1.2-1.8 mm
Profile material EPDM ES-06 EPDM ES-06 EPDM ES-06 EPDM ES-06
Bulb material - - - -
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

 

Dynamic section

Simple clip-on installation for door jambs and similar needs, edge mounts, low and high deflection.

For applications where a small dynamic range is required and a clip-on mounting is preferred. Mounts simply by
pressing into position.

The gasket comes with retaining lances lo lock into the desired position.

* The red line is an indication of the conductive layer.

  clip-on gasket EMI RFI shielding gasket 6551 clip-on gasket EMI RFI shielding gasket 6552 clip-on gasket EMI RFI shielding gasket 6553 clip-on gasket EMI RFI shielding gasket 6554
Partnumber 6551 6552 6553 6554
Available types W, F, H F, H F, H F, H
Clamping range 0.8-3 mm 1-3 mm 1-2 mm 1-2 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6556 clip-on gasket EMI RFI shielding gasket 6557 clip-on gasket EMI RFI shielding gasket 6558 clip-on gasket EMI RFI shielding gasket 6559
Partnumber 6556 6557 6558 6559
Available types F, H  F, H F, H F, H
Clamping range 1-3 mm 1-3 mm 1-3 mm 1-3 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6560 clip-on gasket EMI RFI shielding gasket 6561 clip-on gasket EMI RFI shielding gasket 6562 clip-on gasket EMI RFI shielding gasket 6563
Partnumber 6560 (on request) 6561 6562 6563
Available types F, H  W, F, H W, F, H F, H 
Clamping range 1-3 mm 1-3 mm 1-3 mm 1-4 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6564 clip-on gasket EMI RFI shielding gasket 6565 clip-on gasket EMI RFI shielding gasket 6566 clip-on gasket EMI RFI shielding gasket 6567
Partnumber 6564 6565 6566 6567
Available types F, H  W, F, H W, F, H F, H 
Clamping range 1-4 mm 1-3mm 0.5-2 mm 1-3 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6568 clip-on gasket EMI RFI shielding gasket 6569 clip-on gasket EMI RFI shielding gasket 6570 clip-on gasket EMI RFI shielding gasket 6571
Partnumber 6568 6569 (on request) 6570 6571
Available types W, F, H  W, F, H  W, F, H  F, H 
Clamping range 3-5 mm 1-3 mm 6-8 mm 2.5-3.5 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6572 clip-on gasket EMI RFI shielding gasket 6573 clip-on gasket EMI RFI shielding gasket 6574 clip-on gasket EMI RFI shielding gasket 6575
Partnumber 6572 6573 (on request) 6574 6575
Available types F, H  F, H  W, F, H F, H
Clamping range 1.5-3 mm 2-3 mm 1-3 mm 2-4 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6576 clip-on gasket EMI RFI shielding gasket 6577 clip-on gasket EMI RFI shielding gasket 6578 clip-on gasket EMI RFI shielding gasket 6579
Partnumber 6576 6577 6578 6579
Available types F, H F, H F, H W, F, H
Clamping range 2-4 mm 2-4 mm 2-4 mm 1-3 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gasket 6581 clip-on gasket EMI RFI shielding gasket 6582 clip-on gasket EMI RFI shielding gasket 6583 clip-on gasket EMI RFI shielding gasket 6586
Partnumber 6581 (on request) 6582 6583 6586 (on request)
Available types W, F, H F, H  F, H  W, F, H
Clamping range 1-2.5 mm 1-2 mm 1.5-3 mm 1-3,5 mm
Profile material EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60 EPDM quality ES 60
Bulb material EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06 EPDM quality ES 06
Assembly insert Steel 1.0347 Steel 1.0347 Steel 1.0347 Steel 1.0347

  clip-on gasket EMI RFI shielding gaske 6589 clip-on gasket EMI RFI shielding gasket 6591  
Partnumber 6589 (on request) 6591 (on request)  
Available types F, H F, H  
Clamping range 0.5-1.5 mm  0.5-2 mm   
Profile material EPDM quality ES 60 EPDM quality ES 60  
Bulb
material
EPDM quality ES 06 EPDM quality ES 06  
Assembly insert Steel 1.0347 Steel 1.0347  

Silicone clamp section

Optional with stainless steel interior.
Braiding options possible with monel, stainless steel 316, tcs or aluminum on request.

The gasket comes with retaining lances lo lock into the desired position.

  clip-on gasket EMI RFI shielding gasket 6592 clip-on gasket EMI RFI shielding gasket 9593    
Partnumber 6592 6593    
Available types F, H F, H    
Clamping range  1.5 - 2 mm 2 - 4 mm    
Material  Silicone, 55 ± 5 shore Silicone, 60 ± 5 shore    
Happy to help
Allowed maximum size is 20 MiB. You can upload multiple files