Snap-on mounting fingerstrip 2200 header

Snap-on mounting fingerstrip series 2200

Snap-on fingerstrip gaskets can be attached on tracks or rails, or through holes or slots in your construction

These Snap-on fingerstrips have very low compression force and almost no friction when compressed. They are excellent for “sliding” applications. The symmetrical design allows two-way contact. Very convenient for ESD grounding and RFI/EMI shielding of:

  • Front panel handles
  • Doors in shielded housings
  • Panels in shielded enclosures
  • Covers of shielded enclosures
  • Sliding trays
  • Assembly of plug-in units
  • Back planes
  • And other electronic enclosure applications

Fingerstrips as STP files

To receive the STP files of the fingerstrips please send an email to [email protected] with the part number you need.

Installation is simple

  • Press and hold the edge of the fingerstrip gasket in one of the grooves
  • Push in the direction of the second groove until the
    fingerstrip snaps into the second groove

Snap-on mounting fingerstrip installation

NOTE: For some fingerstrips special Snap-on fingerstrip tracks are available for mounting.

Bold items are 98% on stock.


Snap-on 2202

Snap-on mounting fingerstrip self adhesive technical drawing 2202-01 2202-03 2202-05
2202-01, 2202-05 and 2202-07
Snap-on mounting fingerstrip technical drawing 2202-02
2202-02, 2202-04 and 2202-08
Part number A D F G H Material thickness Available mounting track
2202-01* 9.1 2.8 403 4.8 4.3 0.08 mm -
2202-02 9.1 2.8 403 4.8 4.3 0.08 mm TR2202-02
2202-04 11.4 3.6 383 6.4 5.8 0.08 mm TR2202-04
2202-05* 15.8 5.6 379 9.6 8.8 0.10 mm -
2202-07* 8.9 2.8 508 4.8 4.3 0.08 mm -
2202-08 8.9 2.8 508 4.8 4.3 0.08 mm  
* With adhesive strip
Material: Beryllium-copper

Clip-on 2203

Snap-on mounting fingerstrip technical drawing 2203

The low fingerstrip profile of .080" (2.0 mm) enables practical installation and compression in very narrow grooves and openings. The long, slender fingerstrip profile has very low compression force and is very durable. Works well with "wiping" applications.

Part number A D F G H Material thickness Available mounting track
2203-01 7.6 3.3 406 4.8 4.3 0.05 mm TR2203-03
2203-02 8.1 2.5 406 4.8 4.2 0.05 mm TR2203-03
2203-03 8.1 2.9 400 4.8 4.3 0.05 mm TR2203-03
2203-04 8.1 2.8 406 4.8 4.3 0.05 mm TR2203-03
2203-05 9.1 3.0 381 4.8 4.3 0.05 mm  
2203-06 9.4 3.3 400 6.5 5.7 0.05 mm TR2203-06
2203-08 15.2 5.8 457 7.2 6.4 0.08 mm TR2203-08
2203-09 15.3 5.6 400 9.5 8.7 0.05 mm TR2203-09
2203-10 19.5 8.1 400 9.5 8.7 0.08 mm TR2203-10
2203-11 20.3 8.1 400 9.5 8.7 0.10 mm TR2203-11
Material: Beryllium-copper

Clip-on 2204

Snap-on mounting fingerstrip technical drawing 2204-01 2204-02

2204-01 and 2204-02

Part number A C D F G H Material thickness
2204-01 11.4 6.0 2.0 406 3.1 2.5 0.05 mm
2204-02 15.2 8.2 3.0 406 3.1 2.5 0.05 mm
Material: Beryllium-copper

Clip-on 2205

Snap-on mounting fingerstrip technical drawing 2205
Part number A B D F G H Material thickness
2205-02 15.2 max 2 2.3 406 3.2 2.5 0.09 mm
2205-03 14.0 max 1.5 2.0 406 3.2 2.5 0.09 mm
2205-04 19.1 max 1.5 3.0 406 3.2 2.5 0.09 mm
Material: Beryllium-copper

Clip-on 2206

Tin plated beryllium-copper fingerstrip on a brass track with double transfer tape, scored for break off after each pitch.

Snap-on mounting fingerstrip 2206 Snap-on mounting fingerstrip technical drawing 2206
Part number A B C D F G Material thickness
2206-01 19.0 2.8 13.5 5.6 406 16.8 0.09 mm
Material: tin plated beryllium-copper fingerstrip with brass track

Snap-on fingerstrip mounting tracks

Snap-on fingerstrip mounting tracks TR2202-02
TR2202-02
Snap-on fingerstrip mounting tracks TR2202-04
TR2202-04
Snap-on fingerstrip mounting tracks TR2202-06
TR2202-06
Snap-on fingerstrip mounting tracks TR2203-03
TR2203-3
Snap-on fingerstrip mounting tracks TR2203-06
TR2203-06
Snap-on fingerstrip mounting tracks TR2203-07
TR2203-07
Snap-on fingerstrip mounting tracks TR2203-10
TR2203-10
Snap-on fingerstrip mounting tracks TR2203-11
TR2203-11

The installation of the 2200 Series can be directly in your housing using slots or alternatively using a Snap-on fingerstrips track (mounting rail).

Part number A F
TR2202-02 8.1 400
TR2202-04 11.0 381
TR2202-06 15.3 381
TR2203-03 6.6 406
TR2203-06 A, B or C 8.1 400
TR2203-07 A, B or C 14.2 457
TR2203-10 A, B or C 19.2 400
TR2203-11 A, B or C 17.8 400

Snap-on fingerstrips rivet

Snap-on fingerstrips rivet R-01

R-01

Snap-on fingerstrips rivet R-02

R-02


Part number  
R-01 For plate thicknesses of 0.5 to 1.5 mm
R-02 For plate thicknesses of 1.1 to 1.9 mm

Mounting examples

Snap-on mounting fingerstrip doors lids

Ideally suited for applications where lids or doors (think of doors for a Faraday cage or EMI shielded enclosure) are repeatedly opened and closed.

Snap-on mounting fingerstrip racks enclosures

This type fingerstrip is also widely used in 19” racks, communication cabinets, communication cabinets, EMI/RFI shielded enclosures. The 2200 Snap-on Fingerstrips mounting series profiles can be used for earthing or electric connection.

 

 

Would you like to...

Technical datasheets

To get a quotation for Snap-on mounting fingerstrip series within 24 hours fill in the form below.

Choose part number from the tables above
* Note: The red blocks are required
Products related to Snap-on mounting fingerstrip series

Stick-on mounting fingerstrips for openings of approximately 0 to 3 mm

Stick-on mounting fingerstrips for openings of approximately 3 to 6 mm

Angled fingerstrips series for 90° EMC shielding

Circular fingerstrips

Twisted fingerstrips for EMI shielding

Stick-on mounting fingerstrips for openings of approximately 6 to 11 mm

Contact fingers series

Door fingerstrips/spring contacts

Clip-on mounting fingerstrip series