1400-Miniature-shield-header

Miniature shield 1400

Very small EMI / RFI shielding gasket used for PCB’s, smart phones and other applications where there is little space available

This EMI/RFI gasket can be made so narrow that the height exceeds the width. Nevertheless, it provides sufficient electromagnetic damping.

The gasket is made of a highly electrically conductive foam with or without an electrically conductive self-adhesive
strip on one side. The electrically conductive foam can
be compressed up to more than 50 % of its original height.

The smallest width is 1mm and the maximum height is 6mm. Roll lengths of 1 to 1000 meters, depending on width and height of the EMI gasket.

Applications

  • Shielding on printed circuit board (PCB)
  • EM, RF, LF, HF, EMI, RFI shielding
  • Other products where there is very little space available and low compression force is required

Options

  • EMI/RFI miniature gasket with water seal
  • Resistant to high temperatures
  • With cooling holes
  • With or without self-adhesive
  • Made from electrically conductive foam or electrically conductive rubber
  • Electrically conductive rubber version for chemical resistance

Miniature EMI / RFI shielding gasket, narrower than a matchstick

Miniature EMI / RFI shielding gasket with Amucor foil or textile cover
Miniature shield with self-adhesive backing, made of electrically conductive foam and a version with water seal

Standard dimensions

Width X (mm)
Height
Y
(mm)
  1.0 1.5 2.0 2.5 3.0 3.5 4.0
1.5 141015 141515 142015 142515 143015 143515 144015
2.2 141022 141522 142022 142522 143022 143522 144022
3.4 141034 141534 142034 142534 143034 143534 144034
5.0 141050 141550 142050 142550 143050 143550 144050
6.0 141060 141560 142060 142560 143060 143560 144060

 

Would you like to...

Technical datasheets

To get a quotation for Miniature shield within 24 hours fill in the form below.

See dimensions table
See dimensions table
Select an option:
F : Conductive foam
R : Conductive rubber
Select an option:
S : Standard water seal
N : No water seal
Specify (PSA) if you need conductive self-adhesive.
* Note: The red blocks are required