Frame gasket (EMC/IP) 8100
For EMI shielding of panels and screwed applications like displays, windows, and honeycomb
The 8100 series Frame gaskets are ready-made gaskets according to customer specifications. They have reinforced corner pieces to guarantee optimum shielding performance and easy mounting characteristics.
The gasket can be produced with or without self-adhesive. When the gasket has little contact surface we recommend providing the gasket with an electrically conductive self-adhesive. The frame can be made with, without or with conductive adhesive and there is a amucor (8100) or conductive version (8101). If you send us a drawing, please include the dimensions shown above.
Neoprene core specifications
|Volume weight||140 / 180 kg / m³ /|
|Hardness shore 00||38-55 Sh 00|
|Resistance when compressed||25% 350-630 g / cm²|
|Temperature °C||-40° + 100°|
|Water absorption||< 5%|
|Linear shrinkage (22hr 70°C)||< 5%|
|Max. deformation when compressed||25%, 22 hrs at 70°C 12%|
|Recommend max. compression||25%|
The product's shielding performance depends on the chosen outer material (i.e. the conductive material). The 8100 series Frame gasket can be made with Amucor (Aluminium alloy) or conductive textile (very effective in combination with stainless steel, copper and chrome-plated constructions).
Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.
- Easy mounting
- High shielding performance
- No tools required
- Dimensions up to 2 x 2 m
- Low closure force
- EXTREMELY STRONG
- Can be supplied with self-adhesive
- N : Neoprene
- P : Low closure force PVC foam
- E : EPDM
- F : Flame retardant UL94V-0 foam
- S : Silicone foam
- L : Polyurethane foam (ultra soft)
Compression stops (optional)
Disc or washer-type compression stops can be included to prevent over compression.
|washer type used at bolt holes||Disk type used next to bolt holes|
8100 Frame gasket; Amucor version with neoprene core.
Examples of different uses for the frame gasket
(The solid Gray part is the water seal)
|1. Frame gasket used in a flat lid on a curved
|2. Frame gasket used in a curved lid on a curved housing construction||3. Frame gasket used in a groove|
If you send us a drawing, please include the dimensions shown above.