Ultra soft twin shield

Ultra soft twin shield 7800 series is a range of HF gaskets similar to our Ultra soft shield 7400, which have been combined with an environmental seal (also known as water seal) made of closed-cell foam rubber. The product requires very low closure force. All gaskets are provided with a self-adhesive strip on the side of the water seal.

The standard material for the water seal is neoprene foam. Alternatively a slowly recovering PVC foam is available, which is fully watertight at 30% compression. The ultra soft twin shield is easy to bend so that the water seal is not interrupted.

7800 Shielding performance

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Technical drawing

Benefits

• Deflection up to 80%
• Very low closure force
• Very high electrical conductivity
• High shielding performance
• Roll lengths of 1 to 1000 meters, depending on width and height of the gasket
• Easy to fit, self-adhesive
• High abrasion resistance
• Tools required: a pair of scissors

Options

• Cut into accurate lengths
• UL94V-0 flame-retardant foam core
• Chemical-resistant rubbers like EPDM
• Silicone sponge for high temperatures up to 220 °C
• Different conductive foils and fabrics

Standard dimensions

Tape specification

• 01 standard self-adhesive, asymmetrical
• 02 without self-adhesive
• 03 conductive self-adhesive