Buy our

Amucor foil and tape

4701 amucor tape icon 1

Series

For correct part numbers see table.
Specify the width in mm. Standard roll widths 10, 25, 50, 100. Other width on request
Specify the length in meters. Standard roll length 16.5 meter.

Many EMI problems can be solved easily by the use of Amucor foil or tape, a commonly used material. Amucor foil and tape can be produced with or without (conductive) self-adhesive and an optional insulation layer.

Amucor tape can be cut to any width starting at 3 mm and can be delivered from stock. The most commonly used width is 25 mm; the standard roll length is 16.5 meters.

If coverage of large surfaces is needed, it is usually best to use tape with a conductive self-adhesive in combination with foil. This solution is much cheaper than only using tape.

Amucor foil can also be delivered as die-cut, according to the customer's drawing, on a strip or in pieces (stickers), with optional self-adhesive.

Applications
  • EMI shielding of plastic enclosure parts (EMI/RFI-shielding tape/gasket)
  • Shielding all non-conductive materials
  • Ground plane
  • Anti-static floor (ESD floor)
  • The electrical connection between surfaces (sheets/foils)
  • Die-cuts
  • Shielding in housings and Faraday cages
  • Temporary shielding during tests
  • Mounting transparent foils, windows for EMI/RFI shielding
  • Cable shielding (wrapped around the cable)
  • Temporary shielding during emission and immunity tests
Options
  • Fire-retardant version
  • With (conductive) self-adhesive backing
  • With insulation layer
  • Die-cutting to any shape according to the CAD drawing
Amucor foil (4701)

The reinforced Amucor foil is both cost-effective and heat resistant. This thin foil can be applied easily to any surface and any shape of the housing. We can also supply the foil, which is 0.04 mm thick, in a die-cut version.

amucor foil versions

4701 - Amucor foil, technical drawing

Advantages
  • Cost-effective
  • Easily follows the contours of the housing
  • Fire-retardant
  • Extremely strong
  • Corrosion-free
Amucor tape with standard adhesive (4702)

This is an Amucor tape (a type of aluminum) that is 11 microns thick, reinforced with polyester (23 microns thick), and with an acrylic adhesive on the back.

amucor foil versions

4702 - Amucor tape with standard adhesive, technical drawing

Amucor foil with PET in the middle (4716)

Amucor foil + PET film + Amucor foil. This product consists of two layers of 11-micron thick Amucor (a type of aluminum) with a 23-micron layer of polyester in between. This material is extremely strong.

amucor foil versions

4716 - Amucor tape with PET in the middle, technical drawing

Amucor foil with a reinforcement net (4706)

Amucor foil can also be produced with a strengthening reinforcement net. Because the reinforcement net makes this material so strong, it can be produced in a very large width of 3100 mm. This material is designed to cover walls and floors for protection against unwanted radio frequencies (RF). The material can also be used to quickly create a shielded room, for example by covering the walls of a wooden box. Please note: at the top of the metal is a thin insulation layer for protection against corrosion.

Amucor foil with a reinforcement net can be produced as a foil (4706) without self-adhesive but is also available as tape (4707), with standard adhesive.

amucor foil versions

4706 - Amucor foil with reinforcement net, technical drawing

For more information:

Amucor tape with PET in the middle and conductive adhesive (4718)

Sandwich tape consisting of two layers of Amucor (11 microns thick) with polyester (23 microns thick) in between and a conductive adhesive on the back.

amucor foil versions

4718 - Amucor tape with PET in the middle and conductive adhesive, technical drawing

Technical specification and part numbers
Part number
(Foil without adhesive)		 4701
Max. width 1100 mm		 4716
Max. width 1100 mm		 4706
Max. width 3100 mm
Part number
(Tape with standard adhesive)		 4702
Max. width 1100 mm		 4717
Max. width 1100 mm		 4707
Max. width 1100 mm
Part number
(Tape with a conductive adhesive)		 - 4718
Max. width 1100 mm		 -
Part number
(Foil with an insulation layer
(UL94V-0) 0.15 mm (white))		 4704
Max. width 900 mm		 4719
Max. width 900 mm		 4709
Max. width 900 mm
Part number
(Foil with an insulation layer
(UL94V-0) 0.22 mm (black))		 4705
Max. width 1100 mm		 4720
Max. width 1100 mm		 4710
Max. width 1100 mm
Foil material Amucor Amucor and PET Amucor with a reinforcement net
Surface bright bright bright
Foil thickness 0.023 mm 0.35 mm -
Total thickness 0.048 mm 0.3725 mm -
Adhesive synthetic conductive resin synthetic conductive resin -
Adhesive performance 4.5 N/cm 4.5 N/cm -
El. resistance through adhesive 0.003 Ohm 0.003 Ohm 0.003 Ohm
For tape, standard roll widths (mm) * 10, 25, 50, 100 10, 25, 50, 100 10, 25, 50, 100
Roll lengths* Min. 16.5m (standard)
Other roll lengths on request
These values are measured under laboratory conditions.
In your situation results may differ, please read our Guarantee.

* Other dimensions on request

Happy to help
Allowed maximum size is 20 MiB. You can upload multiple files
More results