Ultra high performance filters for the highest shielding demands 8010

Ultra high-performance filters for the highest shielding demands 8010

For the anechoic chamber, shielded room, cabinet, and shelter, where the effective suppression of radiated and conducted emission is required.
Insertion loss: 100 dB @ 14 kHz - 40 GHz (MIL-STD-220C)

The Ultra high-performance filter is a superior filter housed in a three-compartment casing with bolted covers and accessible terminals that achieves 100 dB insertion transmission loss at 14 kHz and above.

This series is offered as a two-line filter (single-phase and neutral) or as a four-line filter (three phases and neutral). The two-line filter can withstand up to 230 Volt, 1-150 amp, and 46 kW. If you are looking for a filter that can withstand more power we have the four-line filter, this filter delivers up to 400 Volt, 1-150 amp, and 138 kW. The neutral line is always attenuated and all conductors are decoupled from each other. This allows the conductors to operate independently without attenuation loss.

The filter is made to withstand the harshest environment and is very economical. Because of the custom design for your filter, the assembly is very simple and always with very low leakage. This filter is also a stock item and therefore always available quickly.

The circuit is designed as a symmetrical double- circuit with high-quality rod cores providing inductance. These cores do not saturate due to their large air gap and they are insensitive to asymmetrical load.

Foil capacitors ensure a long operating life by their self-healing features even after voltage transients. A seamless fixing of the filter casing to the shielded room is very important to ensure the correct operation. The filter is housed in a casing that has a base flange which provides stable mounting and excellent earthing when bolted to the shielded room via the mounting bolts.

Please note: EMP protection is available on request.


Technical data

Rated voltage VR for two-line filters 250 VAC / 500 VDC line-line or line-case
Rated voltage VR for four-line filters up to 440 VAC
up to 250 VAC
line-line
line-case
Rated Frequency fR DC - 60 Hz  
Rated Current IR See characteristics referred to +40 °C ambient temperature
Number of lines 2 or 4  
Insertion Loss, Per MIL-STD-220C >100 dB 14 kHz – 40 GHz
DC Resistance See characteristics Each Line
Power Dissipation See characteristics At Rated Current
Test Voltage 1200 VDC / 2 s Line-line or line-case
Voltage Drop /Phase ΔV <1% of VR at 50 Hz and IR
Leakage Current ILeakage See characteristics at 380 V / 220 V and 50 Hz
Reactive Current IReactive See characteristics at 380 V / 220 V and 50 Hz
Discharge Time to Below 34V 30 s  
Climatic category 25/070/21  

Advantages

  • For harsh environment
  • Very economical use
  • High performance
  • Low leakage
  • Easy mounting
  • Stock item
  • Custom design

Applications

  • EMC test laboratories
  • Anechoic chambers
  • Tempest rooms
  • facilities

Rated current is available from 6 amp to 3000 amp in both single and three-phase versions. Filters are ideally suited for applications where the very highest performance is demanded.


Mounting

These protections are designed for mounting on the penetration panel or directly on the non-painted wall of the Faraday cage. Mounting terminals are dependent on the amount of power. Please see Connection in the Product range table.


Installation diagram

The technical drawing below shows how a power line filter is mounted on the wall of your Faraday cage.

Compact high performance power line filter instalation diagram


General characteristics

For a clean main supply into a shielded room, high-performance filters are indispensable. Usually, these filters are directly mounted on the shielding wall. It is recommended to route filtered lines into the shielded room (Faraday cage) through the wall with an optional flexible metal conduit.

  • Mains filter for single and three phase systems
  • Insertion transmission loss 100 dB @ 14 kHz
  • Double - ∏ circuit
  • Rod cores allow asymmetrical load
  • Self-healing effect of foil capacitors

Shielding performance

Ultra high performance filters for the highest shielding demands shielding performance


Ultra high performance filters for the highest shielding demands product testing process
Ultra high performance filters for the highest shielding demands options threaded ends

Circuits


Ultra high performance filters 2 line filter circuit
2 line filter
Ultra high performance filters 4 line filter circuit
4 line filter circuit

Single phase and neutral filter types: 230 Volt | 1-150 amp | 34 kVA

Ultra high performance filters diagram 1
Diagram 1

Type A B C D E F G installation instructions Dimensional diagram IR (A) I Leakage (A)* I Reactive (A) DC Resistance (Ω) Power dissipation (w) Connection
8010-2-16 188 205 120 750 450 110 80 M24 conduit screw 1 16 3.5 3.5 70 40 M6 Screw
8010-2-32 188 205 120 750 450 110 80 M24 conduit screw 1 32 5 5 20 40 M6 Screw
8010-2-63 188 205 140 920 620 110 80 M33 conduit screw 1 63 5 5 15 90 M6 Screw
8010-2-100 288 305 180 1180 800 110 80 M60 conduit screw 1 100 9 9 5 120 M12 Screw
8010-2-150 288 305 180 1180 800 110 80 M60 conduit screw 1 150 9 9 3 140 M12 Screw

Three phases and neutral filter types: 400 Volt | 1-150 amp | 103 kVA

Ultra high performance diagram 2
Diagram 2
Ultra high performance diagram 3
Diagram 3

Type A B C D E F G installation instructions Dimensional diagram IR (A) I Leakage (A)* I Reactive (A) DC Resistance (Ω) Power dissipation (w) Connection
8010-4-16 288 305 120 750 450 110 80 M24 conduit screw 2 16 0.7 3.5 70 70 M6 Screw
8010-4-32 288 305 120 750 450 110 80 M24 conduit screw 2 32 0.9 5 20 80 M6 Screw
8010-4-63 348 365 140 920 620 110 80 M33 conduit screw 2 63 0.9 5 15 170 M6 Screw
8010-4-100 348 365 180 1480 1000 160 80 M60 conduit screw 3 100 1.7 9 5 220 M12 Screw
8010-4-150 348 365 180 1480 1000 160 80 M60 conduit screw 3 150 1.7 9 3 270 M12 Screw

* If voltage between neutral and earth is 0V

Would you like to...

To get a quotation for Ultra high performance filters for the highest shielding demands within 24 hours fill in the form below.

Select an option:
2 : 2 lines
4 : 4 lines
Select an option:
16 : 16 ampere
32 : 32 ampere
63 : 63 ampere
100 : 100 ampere
150 : 150 ampere
* Note: The red blocks are required