Buy our Amucor foil with a reinforcement net

Amucor foil with reinforcement net

Amucor foil with reinforcement net for EMI shielding where a strong but also very wide shielding film is required.

Many EMI problems can be solved easily by the use of Amucor foil or tape. When there is a very broad and strong shielding foil required, then our 4706 Amucor foil with a reinforcement net can provide the solution. The shielding foil can be produced with or without (conductive) self-adhesive and an optional insulation layer.

Amucor foil with a reinforcement net can be cut to any width and can be delivered from stock. The most commonly used width is 1000 mm. The standard roll length is 16.5 meters.

Amucor foil with reinforcement net can also be delivered as die-cut, according to your drawing, on a strip or in pieces (as a sticker), with optional self-adhesive.

Applications

• EMI shielding of plastic enclosure parts (EMI/RFI shielding tape/gasket)
• Shielding all non-conductive materials
• Ground plane
• Antistatic floor (ESD floor)
• An electrical connection between surfaces (sheets/foils)
• Die-cuts
• Shielding in housings and Faraday cages
• Temporary shielding during tests
• Mounting transparent foils, windows for EMI/RFI shielding
• Cable shielding (Wrap around the cable)
• Temporary shielding during emission and immunity tests

Options

• Fire-retardant version
• With (conductive) self-adhesive backing
• With insulation layer
• Die-cutting in any shape according to the CAD drawing

Amucor foil with a reinforcement net (4706)

Amucor foil can also be produced with a strengthening reinforcement net. Because the material with the reinforcement net is so strong, it can be produced in a very large width of 3100 mm. This material is designed to cover walls and floors for protection against unwanted radio frequencies (RF). The material can also be used to very quickly create a shielded room, for example from a wooden box.

Amucor foil with a reinforcement net can be produced as a foil (4706) without self-adhesive but can also be produced as tape (4707), with standard adhesive, or as tape (4708) with conductive adhesive.

Shielding performance

In the table below you will find the shielding characteristics of Amucor foil.

Many factors influence the true effectiveness of an EMI/RFI shielding tape when applied, such as type and thickness of foil, type of adhesive, closeness of contact, smoothness of application surface, strength, and frequency of the EMI/RFI signal, etc. Still, an attenuation value can be determined using standard tests and fixtures.

For Amucor tape, typical shielding effectiveness (far field) is in the range of 60 dB to 80 dB (10 kHz to 20 GHz).
For more specifications see the table and graph below.

4706 series - Amucor foil with a reinforcement net

Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Technical specification and part numbers

Part number (Foil without adhesive)	4701 Max. width 1100 mm	4716 Max. width 1100 mm	4706 Max. width 3100 mm
Part number (Tape with standard adhesive)	4702 Max. width 1100 mm	4717 Max. width 1100 mm	4707 Max. width 1100 mm
Part number (Tape with a conductive adhesive)	-	4718 Max. width 1100 mm	-
Part number (Foil with an insulation layer (UL94V-0) 0.15 mm (white))	4704 Max. width 900 mm	4719 Max. width 900 mm	4709 Max. width 900 mm
Part number (Foil with an insulation layer (UL94V-0) 0.22 mm (black))	4705 Max. width 1100 mm	4720 Max. width 1100 mm	4710 Max. width 1100 mm
Construction
Foil material	Amucor	Amucor and PET	Amucor with a reinforcement net
Surface	bright	bright	bright
Foil thickness	0.023 mm	0.35 mm	-
Total thickness	0.048 mm	0.3725 mm	-
Adhesive	synthetic conductive resin	synthetic conductive resin	-
Adhesive performance	4.5 N/cm	4.5 N/cm	-
El. resistance through adhesive	0.003 Ohm	0.003 Ohm	0.003 Ohm
For tape, standard roll widths (mm) *	10, 25, 50, 100	10, 25, 50, 100	10, 25, 50, 100
Roll lengths*	Min. 16.5m (standard) Other roll lengths on request
These values are measured under laboratory conditions. In your situation results may differ, please read our Guarantee.

* Other dimensions on request
Please note:
At the top of the metal is a thin insulation layer for protection against corrosion.