EMI cable shielding with metal carrier

EMI cable shielding with metal carrier and copper tape AC4400DS

-

Stainless steel spiral hose used as steel carrier is o general purpose high quality connecting hose. Made of AISI 304L stainless steel material.

After the tin-plated copper wire mesh wrapped on the steel carrier, an intermediate layer is applied with conductive copper tape material in one layer.

The product is completed by making a shielding braid with tin-plated copper wires as the top layer on the applied copper tape layer. It is produced in 1 o different diameters from 11,0 mm to 62,9 mm.

EMI cable shielding with metaal carrier and copper tape

EMI cable shielding with metaal carrier and copper tape Cu/Sn*
Part number Steel carrier inner diameter (mm) Steel carrier outer diameter (mm)  Knitted outer diameter (mm) Tolerance (mm) Copper wire diameter (mm) Minimum bending diameter static rmin (mm)**
AC4411DS 6,2 9,6 11,0 ±0,2 0,127 33
AC4414DS 8,2 12,2 14,0 ±0,2  0,127  44
AC4416DS 10,2 14,2 15,9 ±0,3  0,127  50
AC4418DS 12,2 16,3 18,1 ±0,3  0,127  57
AC4423DS 16,2 21,6 23,1 ±0,3 0,127  63
AC4429DS 20,2 26,9 28,8 ±0,3 0,127  90
AC4434DS 25,3  32,1  34,3 ±0,4 0,200 109
AC4444DS 32,2 41,1 43,6 ±0,4 0,200 135
AC4453DS 40,1 49,7 52,6 ±0,4 0,200 168
AC4463DS 50,2 60,2 62,9 ±0,5 0,200 208
* With tin-plated copper wire
** The bending diameter may vary ±15% depending on the amount of wiring harness applied.

 

Would you like to...