1920-XYZ-Shielded-enclosures

XYZ Enclosures for EMI shielding 1920

Custom size EMI shielding enclosures, for standard price and no tooling cost.

The XYZ EMI shielding housings 1920 series not just have a fresh new modern look but also shield very well. They can be supplied in any size within just a few days. The shielded housing is made up of only two parts, however, when it is open, it is open on three sides of the housing.
This makes assembly very easy. It can be produced in 3mm thick aluminium or 2mm thick stainless steel (other thickness and materials on request). For good electrical contact and easy opening of the housing there is made use of sophisticated snap-on fingers, bolts
and/or locks which result in controlled accesses to the inside. The round corners gives the housing a friendly look and feel, but the housing is also rigid and molest -proof.


Shielding performance (dB)

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: XYZ shielded enclosures (70)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.


Options

  • The box can be fully personalized with your logo.
  • Cutouts on all 6 sides for displays, ventilation panels, connectors, powersupply, cable entries, switches, buttons and so on.
  • At the interior mounting holes, thread- spuds.
  • Can be supplied with EMI power- and or signal line filters (see Data- and power line-filters)

Benefits

  • Quick open/close system
  • Easy accesses components inside
  • Any not standard size in a few days
  • Plain / stylish design
  • Customization outside with cut outs for data- and power lines
  • Good shielding properties

Applications

  • Shielding of electronic components
  • Rigid, so very well for heavy duty military applications
  • Hand-held test and measurement devices
  • Radio control equipment
  • Wall-mounted monitoring systems
  • Security devices
  • Building control equipment

Data- and power line-filters

This housing can be personalized with power line, USB, VGA, Flat cable etc.

Standard sizes

Part number X (mm) Y (mm) Z (mm) Radius
1920-79x84x44 79 84 44 15
1920-79x84x67 79 84 67 15
1920-100x85x44 100 85 44 15
1920-100x100x90 100 100 90 15/30
1920-127x125x60 127 125 60 15
1920-127x125x90 127 125 90 15/30
1920-130x85x44 130 85 44 15
1920-130x85x97 130 85 67 15
1920-150x100x75 150 100 75 15
1920-150x125x125 150 125 125 15/30
1920-166x166x60 166 166 60 15
1920-166x166x100 166 166 100 15/30
1920-180x85x44 180 85 44 15
1920-180x85x67 180 85 67 15
1920-200x150x75 200 150 75 15
1920-200x200x150 200 200 150 15/30
1920-226x126x60 226 126 60 15
1920-226x126x90 226 126 90 15/30
1920-250x150x90 250 150 90 15/30
1920-250x200x120 250 200 120 15/30
1920-250x250x250 250 250 250 15
1920-268x168x60 268 168 60 15/30
1920-268x168x100 268 168 100 15/30
1920-300x200x100 300 200 100 15/30
1920-300x250x200 300 250 200 15/30
1920-300x300x300 300 300 300 15/30
1920-350x250x150 350 250 150 15/30
1920-350x300x250 350 300 250 15/30
1920-350x350x350 350 350 350 15/30
1920-400x300x200 400 300 200 15/30
1920-400x350x300 400 350 300 15/30
1920-400x400x400 400 400 400 15/30

Closure/options

Snap connection exampleA) Snap connection.
For easy open/closing
Watertight housing exampleB) Watertight housing


Bolted connection exampleC) Bolted connection, when you don't need to open the housing often

Internal EMI shield exampleD) Internal EMI shield without environmental 10 kHz-1GHz

Housing with knitted mesh gasket exampleE) Housing with Knitted mesh gasket

Sandwich-conductive-rubber-gasket exampleF) Sandwich. Conductive rubber gasket in between housing.

Shielded-window exampleG) Shielded window
Spuds for PCB exampleH) Spuds for PCB

Custom sizes and shapes can be produced on request and according to your drawing. There are several options available for the closure options. For example if you want A snap connection with G Shielded window please mention A, G. Send your drawing to request a quote for a custom shape to [email protected]

 

Would you like to...

Images

To get a quotation for XYZ Enclosures for emi shielding within 24 hours fill in the form below.

* Note: The red blocks are required
Acceptable file extensions (preferred a PDF file)
.ai, .bmp, .cad, .doc, .docx, .dwf, .dwg, .dxf, .dxt, .eps, .gif, .icd, .idw, .ipn, .ipt, .jpeg, .jpg, .pdf, .png, .ppt, .pptx, .psd, .rar, .step, .svg, .tif, .tiff, .xls, .xlsx, .zip