8700 V-shape gasket

V-shape gasket 8700

V-shape EMI/RFI shielding gaskets for applications between lids, hinges and locks, and between door and door frame

V-shape EMI/RFI shielding gaskets for applications between lids, hinges and locks, and between door and door frame.

The V-shape gaskets 8700 series are characterized by a very large compression range and low closure force. They come with a self-adhesive strip for easy mounting. The most common version is with conductive nickel over copper textile (Material code T).

The version with highly conductive Amucor foil (Material code A) is designed specifially to be combined with aluminium and zinc-plated steel. To prevent loss of material and for easy shipping we cut the material to exact lengths. The longest length available is 2.5 meters.

V-shape gaskets are also available with a resilient foam rubber insert for more compression just at the moment of closing.

The V-shape gasket 8700 series is flame retardant and can be supplied in a UL94V-0 compliant version. Excellent shielding can be achieved without any permanent closure force. This construction prevents bending of doors, so the enclosure can be less rigid. It is also suitable for hinges and locks.

Benefits

  • Easy to fit with self-adhesive
  • Allows for large tolerances
  • High EMI/RFI shielding performance
  • Very high deflection
  • Very low closure force
  • Lengths of 5 mm up to 2500 mm
  • Only scissors required for installation

Options (on request)

  • Cut into accurate lengths
  • Different conductive foils and fabrics

Metal door

Wooden door

8700 series - V-shape gasket

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.



To place the v-shape in a curve, we recommend that the surface is clean, smooth and dust free.


Examples of applications

The V-shape gasket is intended for applications between lids, hinges and locks as well as between a door and the door frame. Of course many other applications can be imagined.


Standard dimensions

8700-v-shape fig.1+2
8700-v-shape fig.3

Partnumber 8733 8744 8755 8766 8777 8788 87107 871212 871818 872020
Width X (mm) 3 4 5 6 7 8 10 12 18 20
Height Y (mm) 0.3-1.5 0.3-2.0 0.3-2.5 20.6-3.0 0.6-4.0 0.6-4.0 0.6-5.0 0.6-6.0 1.0-9.0 1.0-10.0

 

Would you like to...

Technical datasheets

To get a quotation for V-shape gasket within 24 hours fill in the form below.

Type a part numbers from the dimensions table above
Select an option:
T : Conductive textile
A : Amucor foil
Select an option:
I : With a resilent foam rubber
N : No insert
Specify the length (mm) Max. length 2500 mm. Other on request. Keep small for economic transport
* Note: The red blocks are required