1150 Thermal pads TIM

Thermal pads 1150

Thermal interface materials (TIMs) are designed to fill in air gaps and microscopic irregularities, resulting in dramatically lower thermal resistance and thus better cooling

Thermal interface material is used to fill the gaps between thermal transfer surfaces such as between microprocessors and heat sinks, in order to increase the efficiency of thermal transfer. There is usually air in these gaps, and air is a notoriously poor conductor. The interface material is easy to handle and is not messy. It is available in solid and liquid form and comes in various thicknesses.


Thermal conductivity

The thermal conductivity of the interface material determines its thermal performance to a large extent. The high thermal conductivity of this product guarantees sufficient heat transfer, resulting in a better cooling solution and the desired heat dissipation.


This film, wih its excellent thermal and electrical properties, is especially suitable for high-power applications. The material performs so well that it can be used reliably in densely packed electronic applications.

Properties

  • Good insulation properties
  • Heat conducting
  • Good compressibility
  • Flexible
  • Environmentally friendly

Applications

  • RD-RAM memory chips
  • Heat pipe thermal solutions
  • automotive engines
  • control units
  • plasma supply panels

Benefits

  • Temperatures up to 220 °C
  • High shielding performance
  • Water sealing up to 10 meters
  • Pressure resistant
  • Salt spray / chemical resistant
  • Fluorosilicone rubber for fuel/oil resistance
  • Supplied as sheets, strips or die-cuts
  • Thicknesses of 0.5 to 5mm (see table below)

Part number Color Thermal
resistance
Thermal impedance Thermal
conductivity
Breakdown voltage Dielectric breakdown Ed; ac Volume resistivity Dielectric loss factor tan δ Dielectric constant ε
r
Hardness Young ´s modulus Application temperature Density Available thickness
    W/mK °Cmm²/W
Kin²/W
W/mK KV KV/mm Ωm     Shore 00 N/cm² °C   mm
1150-125 Dark orange 0.8 322
0.5
1.5 6.0 12.0 6.1 x 10
10
1.5 x 10
-1
4.3 10 - 25 24 -40 to +180 2.0 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0
1150-128 Pink / dark orange 0.8 322
0.5
1.5 6.0 12.0 1.8 x 10¹² 1.0 x 10
2.3 10 - 25 67 -40 to +180 1.9 0.5, 2.5, 4.5
1150-200 Pink/yellow 1.2 480
0.75
1.0 8.0 16.0 1.0 x 10
11
1.5 x 10
-3
3.9 10 - 20 22 -60 to +200 1.61 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0
1150-225 Orange 0.6 240
0.37
2.0 6.0 12.0 2.2 x 10
11
1.0 x 10
-3
3.6 30 - 45 58 -40 to +180 1.65 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0
1150-228 Pink / orange 0.6 240
0.37
2.0 6.0 12.0 2.8 x 10¹¹ 1.0 x 10-³ 2.5 30 - 45 160 -40 to +180 1.95 0.5, 1.0
1150-235 Yellow 0.6 240
0.37
2.0 6.0 12.0 1.7 x 1011 2.0 x 10
-2
3.7 25 - 40 32 -40 to +200 1.65 0.5, 1.0, 1.5, 2.0, 2.5, 4.0, 5.0
1150-238 Pink / yellow 0.6 240
0.37
2.0 6.0 12.0 4.7 x 10¹¹ 1.0 x 10
⁻³
1.9 25 - 40 122 -40 to +200 1.65 0.5, 1.0, 2.0, 3.0, 4.5
1150-300 Blue 0.41 164
0.25
3.0 7.0 14.0 1.0 x 1011 5.0 x 10-3 3.3 60 - 75 24 -60 to +200 1.71 0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0
1150-320 Yellow 0.5 147
0.23
2.5 5.0 10.0 6.8 x 1011 2.9 x 10-2 3.4 25 - 38 32 -40 to +180 1.69 1.0, 1.5, 2.0, 3.0, 4.0, 4.5
1150-325 Mint 0.41 164
0.25
3.0 6.0 12.0 8.5 x 1010 1.5 x 10-2 3.8 35 - 50 64 -40 to +180 1.95 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0
1150-450 Brown 0.27 108
0.18
4.5 5.0 10.0 3.6 x 1012 3.0 x 10-3 2.5 65 - 75 95 -40 to +180 1.32 0.5, 1.0
1150-500 Brown 0.25 100
0.15
5.0 1.0 2.0 1.0 x 1011 1.5 x 10-3 3.9 65 - 75 70 -60 to +200 1.33 0.5, 1.0, 1.5, 2.0
1150-525 Violet 0.22 89
0.14
5.5 1.25 2.5 1.6 x 1013 1.0 x 10-3 2.7 50 - 65 99 -40 to +180 1.18 0.5, 1.0, 1.5, 2.0, 2.5, 3.0
1150-600 Grey 0.2 80
0.12
6.0 1.5 3.0 1.7 x 1010 2.0 x 10-3 2.5 60 - 75 77 -60 to +180 1.28 0.5, 1.0, 1.5,
1150-U281
(silicon free)
Grey < 0.6 240
0.37
2.0 7.0 14.0 5.3 x 109 7.8 x 10-2 5.6 55 - 65 244 -40 to +130 1.5 0.5, 1.0, 2.0
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.

 

Would you like to...

To get a quotation for Thermal pads within 24 hours fill in the form below.

Select an option:
1150-600 : W/mK 6.0
1150-500 : W/mK 5.0
1150-300 : W/mK 3.0
1150-320 : W/mK 2.5
1150-255 : W/mK 2.0
1150-202b : W/mK 1.4
1150-105 : W/mK 1.3
1150-200 : W/mK 1.0
1150-210lb : W/mK 1.0
Specify the thickness in mm. Thicknesses available from 0.01 to 8 mm
Specify the width in mm
Specify the length in mm
* Note: The red blocks are required