RF shielded racks emi shield metal enclosure cabineta EMI EMP

Putin shielding 

EMI shielding metal racks and enclosures.

Due to thread of nuclear weapons your data need extra safety. These weapons can create a huge magnetic field which can destroy your data.

The high magnetic waves will create a current at the level of chips in your electronica. Since the wiring of these chips is so small,  ( nanometer level)  these will melt down when there is a big current and the device or data storage is damaged.

Metal cabinets, (19”) racks and shielded enclosures

As the threat of IEMI or EMP attacks becomes more real and the awareness of the risks rises, the necessity of shielded racks and/or datacenters increases. Holland Shielding offers shielded racks which can be fully customized to your requirements.

Attenuation levels

We have 2 standard performance levels for our shielded racks, so you can pick the type of rack that will suit your application.

Level 1: This type of rack is based on the well-known racks in the market and optimized for the shielding of your equipment with our in house produced shielding materials. This rack will give you the basic protection and will reduce the incoming attack up to 10.000 times.

Level 2: The ultimate shielding will come from our racks which are a spin-off off our prefab Faraday cages. These racks are exceeding most shielding effectiveness standards and offer a performance over 120 dB.

Shielded racks shielding performance attenuation

Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.



  • IEMI (Intentional Electromagnetic Interference)
  • Eavesdropping
  • Solar storms
  • EMP attacks
  • MIL-STD-188-125
  • Radiated attacks
  • Lightning
  • NSA 94-106

For more information refer to our leaflet Data Center Security


All our racks can be fully customized to your requirements. Just note that every opening or cable is going to be a leakage in the RF shielding of the rack. For this purpose we have power and signal line filters.

Most integrated options are:

  • Power-line filters
  • Signal-line filters
  • Ventilation honeycombs
  • Waveguide
  • I/O panel (BNC-, SMA-, N-Connector)
  • 7894 UDP data-line filter
  • 7896 USB 3.0 optical converter
  • Fixed/sliding shelve
  • Etc.

Standard dimensions

Level 1 rack
600/800/1200 mm width
400/500/600 mm depth
1200/1400/1600/1800/2000/2200 mm height

Level 2 rack
standard 960 x 800 x 2200 mm W x D x H, internal height 2000 mm > 42 U
any other size on request. Minimum width is 680 mm to fit the door.

Shielded racks dimensions

Shielded rack dimensions

RF shielded racks honeycomb ventialation panel cooling
For extra power ventilation extra fans with shielded Honeycomb ventilation panels can be attached on the back of the rack
RF shielded rack mesh window door transparent
The glass in the door is equipped with a very fine electrically conductive mesh, which you can easily see through, but which guarantees a very good shield.
RF shielded rack data power line filter
Each rack can be equipped with the inputs and filters you need. Think of data connections such as USB and Ethernet, but also filtered power feeds for the device inside the racks.

RF shielded racks wall mount

Wall mount shielded racks

We deliver relatively simple shielded boxes for small studies to large EMI and FCC heavy-duty shielded enclosures.

Our EMI shielded racks are constructed with our patented Mu-ferro 6800 series plate material, which is galvanically perfectly compatible with our EMI shielding gasket materials. This combination results in a very high shielding performance, also in the long term.

Our Shielded enclosures allow you to meet a wide variety of requirements for EMI/RFI suppression including:

  • Mil Spec 285
  • FCC Part 15
  • European VDE
  • I/O panel (BNC-, SMA-, N-Connector)
  • 7894 UDP data-line filter
  • 7896 USB 3.0 optical converter
  • Fixed/sliding shelves
  • Etc.

Would you like to...