Mu-copper tape 3200
A large series of electrically conductive tapes for EMI/RFI shielding, ideal for grounding, conductance and EMI/RFI shielding of housings/Faraday cages.
Many EMI problems can be solved easily with Mu-copper foil or tape. Mu-copper tape is available with or without (conductive) self-adhesive and an optional insulation layer. Mu-copper tape can be cut to any width starting at 3mm and can be delivered from stock. The most commonly used width is 25mm; standard roll length is 16.5 meters.
When large surfaces are to be shielded, it is recommended to cover most of the surface with Mu-copper foil, possibly in combination with tape with a conductive self-adhesive. This solution is much cheaper than covering the entire surface with tape strips.
Mu-copper tape can also be delivered as die-cut, according to your drawing, on strips or in pieces (as stickers), with optional self-adhesive. Almost every shape and size is possible.
- EMI shielding of plastic enclosure parts
- EMI shielding tape/gasket
- Shielding of all non-conductive materials Ground plane
- Anti-static floors (ESD floors)
- Electrical connection between surfaces
- Shielding in housings and Faraday cages
- Temporary shielding during tests
- Mounting transparent foils and windows for EMI/RFI shielding
- Cable shielding (tape wrapped around cable)
- Temporary shielding during emissions and immunity tests
Many factors influence the actual effectiveness of an EMI/RFI shielding tape after it has been applied, such as the type and thickness of foil, type of adhesive, closeness of contact, smoothness of application surface, strength, and frequency of the EMI/RFI signal, etc. Still, attenuation values can be determined using standard tests and fixtures.
For EMI/RFI shielding tape, typical shielding effectiveness (far field) is in the range of 60dB to 80dB (10 kHz to 20 GHz).
3200 series - Mu-copper tape vs other tapes
Please note: These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.
Copper tape with conductive
adhesive 3201, 3212 & 3218
A flexible metal foil with a highly conductive self-adhesive on one side, with a release liner
- Conductive acrylic adhesive
- Supplied on a removable liner for easy handling and die-cutting
Like all Holland Shielding System BV tapes, Copper tape 3201 is available in standard and custom widths and lengths.
The standard length is 16.5 meters.
- 0.035 mm (part no. 3201
- 0.12 mm (part no. 3212)
- 0.18 mm (part no. 3218)
- Other on request
3202 Tinned copper tape
Similar to Tape 3201, but with a layer of tin added for protection against corrosion and better solderability.
3206 Die-cut mounting tape / Sandwich copper tape
A flexible metal foil, laminated on 2 sides with a conductive self-adhesive; available in sheets and rolls.
3207 Copper tape with paper insulation
Similar to Tape 3201, but with a paper layer added to insulate the top layer of copper.
- Thickness of the copper is 0.035 mm
- Thickness of the paper insulation layer is 0.5 mm
- Available up to a width of 1500 mm
Technical specification and part numbers
(with conductive adhesive)
|3201 (0.035 mm thick),
3212 (0.12 mm thick),
3218 (0.18 mm thick)
(with standard adhesive)
|Foil material||soft copper||soft copper||soft copper||soft copper with paper|
|Foil thickness||0.035 mm||0.035 mm||0.035 mm||0.035 mm|
|Total thickness||0.060 mm||0.060 mm||0.085 mm||0.060 mm|
|Adhesive||synthetic conductive resin||synthetic conductive resin||synthetic conductive resin||synthetic conductive resin|
|Adhesive performance||4.5 N/cm||4.5 N/cm||4.5 N/cm||4.5 N/cm|
|Tensile strength||55 N/cm||40 N/cm||55 N/cm||55 N/cm|
|Temperature resistance||155 °C||155 °C||155 °C||-|
|El. resistance through adhesive||0.003 Ohms||0.003 Ohms||0.003 Ohms||0.003 Ohms|
|Standard roll widths (mm)*||10, 25, 50, 100
Other width on request
|Roll lengths*||Min. 16.5m (standard)
Other roll length on request
|These values are measured under laboratory conditions.
Results may differ in other situations Please read our Guarantee.
*Other roll widths/lengths on request
To get a quotation for Mu-copper tape within 24 hours fill in the form below.