Linefilter IECLF375

The IECLF375 protects electronic equipment from common and differential mode line interference in the range of 10KHz up to 30MHz. This “combi-unit” is equipped with IEC connector, fuse holder for one or two 5 x 20 mm fuses, 2 pole on/off switch and fully enclosed metal housing.

Features

The IECLF375 protects electronic equipment from common and differential mode line interference in the range of 10KHz up to 30MHz. This “combi-unit” is equipped with IEC connector, fuse holder for one or two 5 x 20 mm fuses, 2 pole on/off switch and fully enclosed metal housing. These filters are also available for Medical equipment with low leakage current. IECLF375 series filters are high performance filters and have been designed to bring various medical equipments into compliance with EN55011 and FCC Part 15J, Class B conducted emissions limits.


Applications

Computer & networking equipment, Measuring & control equipment, Data processing equipment, Laboratory instruments, Switching power supplies, other electronic equipment.


Technical Data
Operating voltage 250V / 50Hz
120V / 60Hz
Rated current, 40°C 1A / 2A / 4A / 6A
Leakage current <0,5mA / 250 VAC
Temperature range -25°C - +85°C
Test voltage (VDE 0565) 1,8kV / 50Hz - 2s
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
Type / Ordering-No. Nominal current at 40°C CX2 [μF]
CY[pF]
L[mH]
Remarks
IECLF375-1-FX
-2-FX
-4-FX
-6-FX
1A
2A
4A
6A
0,068 + 0,033 + 0,1
0,068 + 0,033 + 0,1
0,068 + 0,033 + 0,1
0,068 + 0,033 + 0,1
2 x 2200
2 x 2200
2 x 2200
2 x 2200
2 x 10,3
2 x 4,6
2 x 1,2
2 x 0,8
X=L: 2 Fuses 5 x 20 mm
Medical version
IECLF375-1M-FX
-2M-FX
-4M-FX
-6M-FX
1A
2A
4A
6A
0,068 + 0,033 + 0,1
0,068 + 0,033 + 0,1
0,068 + 0,033 + 0,1
0,068 + 0,033 + 0,1
-
-
-
-
2 x 10,3
2 x 4,6
2 x 1,2
2 x 0,8


Linefilter IECLF375
Circuit
Dimensions Dimensions
Attenuation in 50 Ohm-
50 Ohm according to CISPR

 

Would you like to...