7100-high-temperature-resistant-EMI-gasket-header

High temperature resistant EMI gasket 7100

High conductive metallized fabric HF shielding gasket with high shielding performance. Widely used in the automotive industry production up to 125 °C.

This series is a HF shielding gasket with high shielding performance and extremely low closure force. This prevents deflection of doors/parts, which improves shielding effectiveness. It is very effective in combination with stainless steel and metals. The core consists of a high-grade FUBA foam which is an EPDM foam covered with high conductive wear & tear resistant metallized fabric. This EMI gasket is used in large scale in automotive production up to 125 °C.


FUBA foam general description

FUBA foam is a semi-closed cell EPDM foam with excellent sealing properties. The semi-closed cell structure combines the flexibility of open cell types with the excellent sealing capabilities of closed cell types (after compression).
This unique foam can be laminated with advanced adhesive technology to seal (complex) gaps against water, wind,
dust, noise and heat.


FUBA foam characteristics

Good resistance to UV, humidity, high and low temperatures and chemicals (such as acids and alkalis). The flexibility of the foam makes sure that the optimal sealing performance is obtained, even with expansion or contraction of the structure caused by temperature changes. Thanks to the low compression load the foam will never deform the structure after application.

Combined with advanced adhesive technology, the foam can be applied on greasy, rough, smooth, and low energy surfaces. No heavy metals (such as cadmium) or regulated substances (such as CFC’s and halogen gases) are used during the manufacturing process nor in the product itself. FUBA foam can be disposed of by incineration.


7100 - High temperature resistant EMI gasket

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Features

  • Semi-closed cell structure
  • Good UV resistance
  • Good weatherability
  • Low compression load
  • Very high electrical conductivity
  • High shielding performance
  • Roll length of 1 to 1000 meters.
    (Depending on width and height of the EMI gasket)
  • Easy to fit with self-adhesive
  • High abrasion resistance
  • Can be cut with scissors
  • Because the FUBA foam series is so soft, it is easy to bend around corners

Application

FUBA foam gaskets are specifially designed to seal (complex) gaps against electrical noise and heat. Depending on the applications, the EMI gasket needs to be compressed between 50-80% to activate its sealing properties.  Automotive - sealing of HVAC unit, dashboard, air duct, glass run, fire wall. Building and construction - sealing of exterior panel joints, solar panels. Industrial - sealing of air-conditioners, mobile phones, refrigerators.


Tape specification

  • With standard self-adhesive placed in the middle
  • Without self-adhesive
  • With conductive self-adhesive
  • Standard self-adhesive, asymmetrical
  • Standard self-adhesive placed on the side

FUBA foam core specifications

Properties Value Standard
Density 95 kg/m³ ISO 845
Thickness 3-30 mm  
Temperature - service (continuous) -40 to 135 °C  
Temperature max 180 °C  
Compression load (50%) 5 kPa ISO 844
Elongation 430 % ISO 1798
Elongation - acid (1% H2SO4) 430 % immersion at 20 °C for 7 days
Elongation - alkaline (1% NaOH) 390 % immersion at 20 °C for 7 days
Elongation - initial 430 % immersion at 20 °C for 7 days
Tensile strength - acid (1% H2SO4) 81 kPa immersion at 20 °C for 7 days
Tensile strength 90 kPa ISO 1798
Tensile strength - alkaline (1% NaOH) 77 kPa immersion at 20°C for 7 days
Tensile strength - initial 90 kPa immersion at 20°C for 7 days
Water absorption ISO 2896  
Flammability pass FMVSS 302
Weatherability excellent  
High deflection up to 65 %  

Standard dimensions

7100-High-temperature-resistant-EMI-gasket-technical-drawing
Width X(mm)
Height Y(mm)   3 4 5 6 7 8 9 10 12 15 18 20 25 32 50
2 7132 7142 7152 7162 7172 7182 7192 71102 71122 71152 71182 71202 71252 71322 71502
3 7133 7143 7153 7163 7173 7183 7193 71103 71123 71153 71183 71203 71253 71323 71503
4   7144 7154 7164 7174 7184 7194 71104 71124 71154 71184 71204 71254 71324 71504
5     7155 7165 7175 7185 7195 71105 71125 71155 71185 71205 71255 71325 71505
6       7166 7176 7186 7196 71106 71126 71156 71186 71206 71256 71326 71506
8         7178 7188 7198 71108 71128 71158 71188 71208 71258 71328 71508
9             7199 71109 71129 71159 71189 71209 71259 71329 71509
10               711010 711210 711510 711810 712010 712510 713210 715010
12                 711212 711512 711812 712012 712512 713212 715012

Bold, underlined item numbers are 98% stock items.

Would you like to...

To get a quotation for High temperature resistant EMI gasket within 24 hours fill in the form below.

Select your part number from the part number table above. When you need a 4 x 4 mm profile, the required part number is 7144
Select an option:
01 : Standard self-adhesive placed in the middle
02 : Without self-adhesive
03 : With conductive self-adhesive (only recommended on small sizes)
06 : Standard self-adhesive, asymmetrical
07 : Standard self-adhesive placed on the side
* Note: The red blocks are required