High temperature paint 3840

Elemental static silicone/acrylic coating which offers great electrostatic resistance in addition to its anti-corrosion properties. Continuous heat resistance is provided up to 350 °C.

An elemental static silicone/acrylic coating which offers great electro static resistance in addition to its anti-corrosion properties. Continuous heat resistance is provided up to 350 °C.

Typical applications would include oven interiors, flow solder machines etc.

The 3840 high temperature paint is available in cans of 5 Liter and cans of 20 Liter


Mixture

Phenylmethyl polysiloxane resin, acrylic resin, conductive mineral additive, titanium dioxide.


Technical specifications

Properties  
Surface resistivity 108Ω/sq. (ASTM D257)
Colour Light grey
Specific gravity 1.3g/cc
Coverage approx. 4 – 6 sq mtr/ltr.
Drying time (air) 1 hour – touch dry
Stoving at 220 °C 10 – 15 minutes
Shelf life 6 months
3840 High temperature paint
3840 High temperature paint

Application

Application  
Surface preparation All contaminants including mould release, grease and dirt must be removed. A suitable primer may be necessary on certain substrates.
Mixing Some settling may occur in the can, so care must be taken to mix in all solids. Should any dilution be necessary, thinners should be used.
Application The 3840 High temperature paint can be used by a conventional spray gun ( 40 – 50 psi pressure), or by brush coating.
Stoving Allow parts to air dry for a minimum of 24 hours then oven cure at a temperature of 100 °C for approx. 10 minutes.

Precautions

Is Highly flammable. Keep away from heat, sparks and open flames. Keep all containers closed when not in use.
Use under well ventilated conditions. Personal respiratory protection should be worn under spraying conditions.
Such devices must be used in accordance with the manufacturers instructions.
Avoid contact with skin. Wear protective gloves and clothing. Wash thoroughly with soap and water after use. If accidentally swallowed, seek medical advice.


Notice:

For this product there are no free samples available


 

Would you like to...

To get a quotation for High temperature conductive coating within 24 hours fill in the form below.

* Note: The red blocks are required