HDMI cable connector shield 4975

Easy to be stuck to any HDMI connector to create a high shielding performance HDMI cable

An HDMI cable in- or outside electronics housing often leads to interference.

We have recently developed an HDMI cable connector shield that is very easy to be stuck to any connector of an HDMI cable. With this shield the cable including the connector can be fully shielded to get the best shielding performance.

Most sizes are available from stock but the shield can be produced in any dimension. The shields can also be manufactured according to your drawing.

Shielding performance can even be improved using optional grounding connections or by using multiple layers, or multiple HDMI connector shields stuck over each other.


Benefits

  • Very high shielding performance
  • Available for any connector
  • Easy to mount
  • Good connection to the shield of the cable

Options (on request)

  • Can be equipped with grounding strip for better performance
  • Performed in an Amucor version

Standard part numbers

The HDMI connector shield is developed so that it has a fairly large overlap. This makes the shield suitable for almost any HDMI connector. The standard part number for an HDMI cable connector shield is 4975. Any custom sizes/part numbers on request.

Example image of a 8215 series HDMI cable connector shield stuck on a HDMI cable. Please note, The cable in this example is fully shielded, so the cable itself is also packed with conductive textile
Example image of a 4975 series HDMI cable connector shield stuck on an HDMI cable. Please note, the cable in this example is fully shielded, so the cable itself is also packed with conductive textile
Example image if a HDMI cable shielded with our 8215 series HDMI cable connector shield combinet with a knitted wire mesh tube for low frequency shielding
Example image of an HDMI cable shielded with our 4975 series HDMI cable connector shield combined with a knitted wire mesh tube for low frequency shielding

 

Would you like to...

To get a quotation for HDMI cable connector shield within 24 hours fill in the form below.

* Note: The red blocks are required