Flexible EMI-shielding tube
A ready-to-use Mu-copper wire or tinned Mu-copper wire braided EMI-shielding tube through which a cable or bundle of cables can be pulled.
Flexible EMI shielding tube is a ready-to-use Mu-copper wire or tinned Mu-copper wire braided tube through which a cable or bundle of cables can be pulled. When the braided EMI/RFI-shielding tube is compressed lengthwise, the diameter expands to simplify the assembly. Therefore a wide range of cable diameters can be shielded with a single flexible shielding tube.
Please note that the EMI/RFI-shielding tube has to be expanded for larger diameters and that a larger nominal length will then be required - up to twice the length of the cable.
Typical EMI/RFI problem areas behind connectors and backshells can easily be shielded with the 4800 series Flexible shielding tube (a.k.a. tubular braids). Multiple sizes are available to shield problem areas at the ends of cables or harnesses where additional EMI/RFI shielding is necessary to meet demanding specifications
|3 - 6||0.12 - 0.24||4806||1.32|
|5 - 15||0.2 - 0.59||4815||7.9|
|12 - 24||0.47 - 0.95||4824||12.4|
|20 - 36||0.79 - 1.42||4836||19.4|
|32 - 48||1.26 - 1.89||4848||-|
|42- 60||1.65 - 2.36||4860||-|
For larger diameters, please consider our 4730-4760 - Wrapshield
Advantages of Flexible EMI-shielding tube
- Highly flexible
- High EMI/RFI-shielding performance
- Wide range of applications
- Easy to cut
- Useful in a broad range of temperatures and environments
|These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
01 Tie wrap
03 Cable entry
To get a quotation for Flexible shielding tube within 24 hours fill in the form below.