Standard performance power line filter

The SP (Standard performance) filters provide filtering for frequency inverters and variable speed motor drives. Designed for very noisy applications, they attenuate conducted interference at low and high frequency ranges and protect programmable logic controllers from RF noise on the AC power line. These filters perform best when installed on the line side of the motor drive. The SP filters better prevent noise from returning to the line, enabling equipment to meet strict European regulations on RFI.

Suited for field wiring applications, these filters are ideal for EMC troubleshooting and field refurbishing. The filters could also be sold as an accessory to motor drives marketed Worldwide.

Standard performance power line filter

General specifications

  • High performance single phase filter
  • Suitable to meet latest EMC standards
    (EN55011, -14, UL 1283 and EN133200)
  • Applicable in single phase-powered FC-drives with ling motor-cables
  • Very high insertion loss
  • Double stage design
  • Shock protected screw type terminals
  • Ideal for EMC-trouble shootin and EMC-refurbishing in the field

Mounting

These protections are designed for mounting on the penetration panel or directly on the non-painted wall of the Faraday cage. The SP power line filters feature side flanges for easy mounting and DIN type terminals which eliminate live metal parts, allowing safer and easier connection.


Typical applications

  • Frequency inverters
  • Variable speed motor drives

Technical specifications

Maximum leakage current, each line-to-ground
@ 120 VAC 60 Hz : 3.8 mA
@ 250 VAC 50 Hz : 6.7 mA
Hipot rating (One minute)  
line-to-ground : 2250 VDC
line-to-line : 1450 VDC
Operating frequency : 50/60 Hz
Rated voltage (max.) : 250 VAC

Models and ordering data

Referencerated
Current
ConnectionInductanceLeakage current
@250V/50Hz
(A)Type(L)(mA)
SP - 2006 6 Terminal block 4mm2 8,8 mH 5,2
SP - 2012 12 Terminal block 4mm2 5,6 mH 5,2
SP - 2016 16 Terminal block 4mm2 5,5 mH 5,2
SP - 2025 25 Terminal block 6mm2 5,0 mH 5,2
SP - 2036 36 Terminal block 6mm2 2,0 mH 5,2
SP - 2050 50 Terminal block 6mm2 2,0 mH 6,5

For the explanation of the reference see chapter how to order below.

*See Mechanical data pictures below.

These values are measured under laboratory conditions.
In your situation results may differ, please read our Guarantee.


Attenuation characteristics
(Red = Asym. / Grey = Sym)

Standard performance power line filter (SP-2006)
SP-2006 (6A)
Standard performance power line filter (SP-2012)
SP-2012 (12A)
Standard performance power line filter (SP-2016)
SP-2016 (16A)
Standard performance power line filter (SP-2025)
SP-2025 (25A)
Standard performance power line filter (SP-2050)
SP-2050 (50A)

These values are measured under laboratory conditions.
In your situation results may differ, please read ourGuarantee.


Dimensions in mm

ReferenceABCDEF
SP-2006 116.8 78.7 45.21 67.8 94.0 50.8
SP-2012 151.3 100.6 55.4 88.9 114.8 50.8
SP-2016 151.3 100.6 55.4 88.9 114.8 50.8
SP-2025 175.5 139.2 64.77 124.5 150.9 70.0
SP-2036 175.5 139.2 64.77 124.5 150.9 70.0
SP-2050 175.5 139.2 64.77 124.5 150.9 70.0

* For the explanation of the reference see chapter how to order below.


Mechanical data

Low performance power line filterStandard performance power line filter
(Front view and top view, see dimension table)
Standard performance power line filter (sP-2006, SP-2012, SP-2025)
(Side view)
Standard performance power line filter (sP-2025, SP-2036, SP-2050)
Standard performance power line filter Bottom vien
(Bottom view)
Standard performance power line filter (SP-2025, SP-2036, SP-2050)

How to order

The picture below explaines how to generate a standard performance power line filter part number.

Serie (SP = Standard performance) Amount of phases Current (A) Amount of volts (120/250).

How to order a Standard performace power line filter

Would you like to...