electrically conductive fekt emi shielding fabric polyesther non-woven

Electrically conductive felt 5730

Felt, metalized with pure nickel

We would like to present our 5730 conductive felt for EMI shielding. A special electrically conductive coating is applied to our felt products to make them conductive. This material is widely used in various industries for EMI shielding applications. Conductive felt is a non-woven polyester fabric with an electrically conductive nickel coating. The thickness is 1.5 mm.


Features

  • Maximum width 470 mm
  • Nickel coating: 35 - 40 g/m2

Options

  • With or without conductive adhesive
  • CNC cut according to your drawing
  • Adhesive on both sides (on request)

Specifications

Part number 5730
Tensile strength
(length of roll)
>=230 N/5cm
Tensile strength (across) >=340 N/5cm
Fabric weight 150 g/m2
Thickness 1.5mm
Max. elongation >=55%
Flame resistance UL 94 HB

Magnetic field H
0 - 30 MHz
Magnetic field E
1 MHz - 30 MHz
Plane wave
2 GHz - 18 GHz
3 MHz 15 dB 1 MHz 100 dB 100 MHz 52 dB 0.8 GHz 67 dB
10 MHz 25 dB 5 MHz 75 dB 150 MHz 50 dB 0.9 GHz 70 dB
15 MHz 28 dB 10 MHz 62 dB 400 MHz 62 dB 1.0 GHz 70 dB
20 MHz 32 dB 20 MHz 60 dB 500 MHz 65 dB 10.0 GHz 90 dB
30 MHz 35 dB 30 MHz 56 dB 700 MHz 70 dB 18.0 GHz 70 dB
These values are measured under laboratory conditions.
In other situations, results may differ; please read our Guarantee.

 

Would you like to...

Technical datasheets

General documentation

To get a quotation for Electrically conductive felt within 24 hours fill in the form below.

Specify the width in mm. Maximum width of 470 mm
Specify the length in mm.
Select an option:
SSA 01 : Standard adhesive (non-conductive)
NON 02 : Without self adhesive
CSA 03 : With conductive self adhesive
* Note: The red blocks are required