This means that the data on this webpage is out of date.
We advise you to go to the new webpage about Data line filters - Phone 4 leads.
Data line filters with NEMP lightning protection for data transmission
- Multi-stages protection
- Tinned metal case
- Tinned brass snap and pick
- Resin sealing
- Flame retardant V0
- Maxi intensity used 0.5 A
- Operating temperature -40 + 85 degrees Celcius
- Resistance to 8/20s 20 KA lightning wave 1 shock
- Resistance to 8/20s 5 KA lightning wave 100 shock
- Weight 350
Feed through mounting - Attachmet by nut and elastic round (40 Nm torque value maxi)
Connection by soldering:
|Soldering temperature||< 240 degrees Celcius|
|Soldering time||< 6 s|
|Power soldering iron||< 40 W|
M32 mounting possible with adaptation to make the interchangeability with 2 leads units on request.
|Passband at 3 dB||Resistance
DT 19200 bauds
|1500||56 kbits/s||600||500kHz||< 1.2||4|
|1600||64 kbits/s||100/120||500kHz||< 1.2||1|
|1700||144 kbits/s||100/120||1 MHz||< 1||2|
|1800||256 kbits/s||100/120||2 MHz||< 0.5||3|
|1900||512 kbits/s||100/120||5 MHz||< 0.5||4|
|2000||2.048 kbits/s||100/120||10 MHz||< 0.5||5|
|These values are measured under laboratory conditions.
In your situation results may differ, please read our Guarantee.
|Maxi voltage used (V)||common mode||16||50||100|
|Maxi residual voltage (V)
common mode GIC 5KA test