Conductive Graphite filled rubber 5755-S
The rubber is made conductive by incorporating small conductive raphite particles throughout the material.
The rubber is made conductive by incorporating small conductive Graphite particles throughout the material. It can provide an EMI-proof and watertight seal in narrow constructions.
5755-S Electrically conductive Graphite filled rubbers are typically used for ESD and EMI shielding applications.
Due to its quite excellent conductivity, grounding, and EMI shielding effect, it is well suited for ESD application in electronics equipment. The rubber can be manufactured in various shapes such as sheets, molded parts, die-cut, strips, o-rings, etc.
- Excellent conductivity on the entire surface
- Excellent electromagnetic shielding effect
- Easy die-cutting, kiss-cutting and slitting
- Temperature ranges of -60 to +185 ºC (under certain circumstances, tolerance can be up to 220 ºC)
- Available up to 10 mm thick rubber
Conductive adhesive information (Conductive PSA)
|Adhesive strength||g/25mm||850||ASTM D 3330|
|Conductive PSA||-||Acrylic + Ni||-|
|Width (mm)||600 x 600 (larger sizes on request)|
|Thickness (mm)||0.8 to 5 (thicker on request)|
|Elongation, %, min.||50|
|Flame resistance, UL94 (horizontal)||HB|
|Flame resistance, UL94 (vertical)||V-0|
|Volume resistance, Ohm-cm
(expression of conductivity)
|Shore A (1 mm thickness):||71|
|Shore A (2 mm thickness)||75|
|Tensile strength. psi, min.||50|
Shielding effectiveness (dB)
|These values are measured under laboratory conditions. Results may differ in other situations - please read our Guarantee.|