Conductive fluorosilicone elastomer 5751 header

Conductive fluorosilicone elastomer 5751

Conductive fluorosilicone elastomer is a 65-durometer, electrically conductive, silver-Aluminium shielding fluorosilicone that is designed to meet MIL-DTL-83528 Type D.

Silver-Aluminium Conductive Fluorosilicone Elastomer

5751 - Conductive fluorosilicone elastomer is a 65-durometer (Shore A), electrically conductive fluorosilicone compound that is filled with silver-plated Aluminium particles and comparable to Parker Chomerics 1287 and 1298 EMI shielding materials for conductive elastomer gaskets.

MIL-DTL-83528 Type D

5751 - Conductive fluorosilicone elastomer is desgined to meet the requirements of MIL-DTL-83528 Type D for a silver-plated, Aluminium-filled fluorosilicone capable of 90 dB of plane wave shielding effectiveness at 10 GHz, with a continuous use temperature range of -55 °C to +160 °C, and resistant to solvents and jet fuels.

Conductive Elastomer Gasket Materials

5751 - Conductive fluorosilicone elastomer is supplied as fully-cured, conductive sheet stock or as ready-to-mold compounds. Catalyzed raw materials are available for press-cure molding and have a shelf life of six months. Uncatalyzed materials have an unlimited shelf life, but may require freshening after 1 to 2 years.

Technical data

The data below was generated using ASTM test method and procedures. 5751 - Conductive fluorosilicone elastomer was designed to meet the requirements outlined in the MIL-G-83528C specifications.

Data Typical Values
Shore A 65
Tensile psi (75 minimum) 185 psi
Elongation % (300 minimum) 350%
Compression Set % (30 max.) 21% (70 hours at 100 °C)
Specific Gravity (1.75 – 2.25) 2.08
Volume Resistivity ohm / cm (0.004 max.) .002 ohm /cm
Color Tan
Thermal Stability Range -60 °C - 220 °C


Would you like to...

To get a quotation for Conductive fluorosilicone elastomer within 24 hours fill in the form below.

5751 Conductive fluorosilicone elastomer
Specify the width of the sheet in mm
Specify the length of the sheet in mm
* Note: The red blocks are required
Acceptable file extensions (preferred a PDF file)
.ai, .bmp, .cad, .doc, .docx, .dwf, .dwg, .dxf, .dxt, .eps, .gif, .icd, .idw, .ipn, .ipt, .jpeg, .jpg, .pdf, .png, .ppt, .pptx, .psd, .rar, .step, .svg, .tif, .tiff, .xls, .xlsx, .zip