5730 electrically conductive felt

Electrically conductive felt 5730

Felt, metalized with pure nickel

We would like to present our 5730 conductive felt for EMI shielding. A special electrically conductive coating is applied to our felt products to make them conductive. This material is widely used in various industries for EMI shielding applications. Conductive felt is a non-woven polyester fabric with an electrically conductive nickel coating. The thickness is 1.5 mm.


Features

  • Maximum width 470 mm
  • Nickel coating: 35 - 40 g/m2

Options

  • With or without conductive adhesive
  • CNC cut according to your drawing

Specifications

Part number 5730
Tensile strength
(length of roll)
>=230 N/5cm
Tensile strength (across) >=340 N/5cm
Fabric weight 150 g/m2
Thickness 1.5mm
Max. elongation >=55%
Flame resistance UL 94 HB

Magnetic field H
0 - 30 MHz
Magnetic field E
01 MHz - 30 MHz
Plane wave
2GHz - 18GHz
3MHZ 15dB 1MHZ 100dB 100MHZ 52dB 0.8GHz 67dB
10MHZ 25dB 5MHZ 75dB 150MHZ 50dB 0.9GHz 70dB
15MHZ 28dB 10MHZ 62dB 400MHZ 62dB 1.0GHz 70dB
20MHZ 32dB 20MHZ 60dB 500MHZ 65dB 10.0GHz 90dB
30MHZ 35dB 30MHZ 56dB 700MHZ 70dB 18.0GHz 70dB
These values are measured under laboratory conditions.
In other situations, results may differ; please read our Guarantee.

 

Would you like to...

Technical datasheets

General documentation

To get a quotation for Electrically conductive felt within 24 hours fill in the form below.

Specify the width in mm. Maximum width of 470 mm
Specify the length in mm.
* Note: The red blocks are required