Compartment shield for PCBs 1800

Compartment shield 1800 series for PCB’s was developed to shield only a part of the printed circuit board

Electromagnetic (EM) radiation can prevent a device
from functioning correctly. This is called electromagnetic interference (EMI).

Compartment shield 1800 series for PCB’s was developed to shield only a part of the printed circuit board (PCB) from electromagnetic radiation at the source, rather than shielding all of the components or the entire housing/enclosure of the device against electromagnetic radiation.
Compartment shielding 1800 series is available in many sizes and configurations. Whether it is for a small number of prototypes or large production, we will be happy to produce the precision components that you require.

Compartment shield is a highly conductive foil laminated with a high-deflection, low closure-force foam layer. The housing itself is used to close the separations on the PCB.
The high-deflection, low closure-force foam is also available combined with conductive fabrics or non-wovens. Please note that the compartment shield must make contact to ground.

order example

Part numbers

Foam thickness PU foam (max. 80 % compression)
+ Amucor foil
PU foam (max. 80 % compression)
+ Conductive textile
Neoprene foam (max. 50 % compression) + Amucor foil Neoprene foam (max. 50 % compression) + Conductive textile
3 mm 1800-1-3 1800-2-3 1800-3-3 1800-4-3
4 mm 1800-1-4 1800-2-4 1800-3-4 1800-4-4
5 mm 1800-1-5 1800-2-5 1800-3-5 1800-4-5
6 mm 1800-1-6 1800-2-6 1800-3-6 1800-4-6
8 mm 1800-1-8 1800-2-8 1800-3-8 1800-4-8
10 mm 1800-1-10 1800-2-10 1800-3-10 1800-4-10
15 mm 1800-1-15 1800-2-15 1800-3-15 1800-4-15

Would you like to...


To get a quotation for Compartment shield for PCBs within 24 hours fill in the form below.

Select an option:
1 : PU Foam + Amucor foil
2 : PU Foam + Conductive textile
3 : Neoprene Foam + Amucor foil
4 : Neoprene Foam + Conductive textile
Please specify the thickness in mm
Please specify the length in mm
Please specify the width in mm
Please specify the height in mm
* Note: The red blocks are required
Products related to Compartment shield for PCBs

Clip-on PCB shielding system