5770 series Conductive Foam

Structure with foam as its central layer, suitable for EMI shielding and absorbing gaskets

This conductive foam is made of polyurethane foam coated with copper and nickel. Compression is 25% to 75%. The maximum application temperature is between 60 and 70 degrees Celsius.

The material will return to almost its original height when released. The foam is covered with a layer of conductive polyurethane to protect it from environmental influences and to prevent burrs when cutting. Its conductivity is excellent in all directions (X, Y, and Z). Conductive foam is fire retardant as well as Restriction of Hazardous Substances (RoHS) compliant.


The conductive foam is characterized by:

  • Available in thicknesses of 1, 2, 2.2 and 3.4 mm
  • Several layers can be joined together for thickness, on request
  • Excellent electric conductivity throughout the material
  • Excellent electromagnetic shielding effect
  • High workability due to adhesion
  • Easy die cutting, kiss cutting and slitting
  • Size - Sheet type: max 950 x 950 mm (other sizes on request).

Applications

  • Mobile phone
  • Noise filter core
  • Cable tray
  • Shielded rooms

Technical drawing

Conductive foam technical drawing
Conductive foam technical drawing

Technical data

ItemData
Thickness (mm) 1, 2, 2.2 or 3.4
(other sizes on request)
Color Gray
Width (mm) Max. 950
Length (meters) Max. 950
Adhesive strength (gf/25mm) >1,000
Holding strength (sec) >3,600
Surface resistance (Ω/sq) 0.2
Surface resistance (Ω/in) 1.0 max
Volume resistance (Ω/sq) 0.2
Top-bottom resistance  (Ω/in) 1.0 max
Restriction of Hazardous Substances (RoHS) Compliant
Fire retardant (cm/min) Pass
Max. application temperature Between 60 and 70 degrees

Material specifications

  • Mesh: woven polyester, copper and nickel coated
  • Conductive foam: polyurethane foam (copper and nickel coated)
  • PSA: acrylic ester polyol copolymer + nickel powder
  • PU coating: polymer resin (polyurethane)
  • Release liner: CP paper avg 150 μm

Benefits and options

  • With or without self-adhesive
  • Supplied as sheets, strips or die-cuts
  • With water seal
  • Resistant to high temperatures, with cooling holes
  • Reinforced with non-woven fabric on 1 or 2 sides
  • PSA attachment method option
  • Nickel/copper metalization
  • X-Y-Z axis conductivity
  • Tolerance of ± 0.5 mm
  • I/O static applications/gasket replacement

Shielding effectiveness 100Mhz - 1GHz

  • 1.5 mm thickness, 80dB - 83dB
  • 2.4mm thickness, 88dB - 104dB
  • 3.5mm thickness, 80dB - 103dB
Conductive foam in various thicknesses and cut to shape
Conductive foam in various thicknesses and cut to shape
Conductive foam in various thicknesses and cut to shape
Conductive foam can be cut into any shape  according to your CAD drawing. The round parts have a copper and nickel plated non-woven top layer - this is optional
Conductive foam has an open cell structure and is thereby very well to compress
Conductive foam has an open cell structure which makes it easy to compress
Conductive foam kiss cut according to customer needsConductive foam kiss cut according to customer needs
Conductive foam kiss cut according to customer's requirements. The conductive foam pieces can be easily removed from the release liner and be stuck into place with the electrically conductive adhesive. 
Very thin (1mm thick) Conductive foam cut according to customer needsConductive foam kiss cut according to customer needs
Very thin (1mm thick) Conductive foam cut according to customer needs 
5770 product example in useProduct example of 5570 Conductive foam in use
Product example of 5570 Conductive foam in use 
5770 product example in useProduct example of 5570 Conductive foam in use
Product example of 5570 Conductive foam in use 

5770 - Conductive foam

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: 5770 - Conductive foam (67)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Conductive Foam for EMI shielding and absorbing Gasket 5770 Holland Shielding Systems BV Conductive Foam for EMI shielding and absorbing Gasket Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.1/5 based on 5 customer reviews
In stock
48.00 48.00 48.00 EUR
48.00 48.00 48.00 Retail EA EUR
1 Conductive Foam for EMI shielding and absorbing Gasket 5770 Holland Shielding Systems BV
Product description: Structure with foam as its intermediate layer, offering a suitable material for EMI shielding and absorbing Gasket

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radio frequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: 0031782049000

Fax: 0031782049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

Would you like to...

To get a quotation for Conductive foam within 24 hours fill in the form below.

Series
Width (mm)
Length (mm)
Available:
1, 2, 2.2, 3.4 mm.
Other on request
Select an option:
SSA 01 : Standard adhesive (non-conductive)
NON 02 : Without self adhesive
CSA 03 : With conductive self adhesive
* Note: The red blocks are required