Clip-on gasket 6500

Clip-on EMI/RFI shielding gaskets with water seal. These gaskets are also know as trim gaskets or trimshield gaskets.

This easily mounted clip-on gasket is composed of two layers: a sponge rubber water seal, and an EMI-shielding side of highly conductive, wear-resistant metallized fabric. The gasket is very flexible due to the hollow rubber, ensuring a low closure force.

The gasket is assembled without tools, simply by manually pressing the section onto the metal flange of your enclosure. Different sizes are available on request. The gasket can be bent in either direction (it can not be bent into a right angle, but it can form a rounded corner with a very small radius). Temperature ranges from -40 to +110°C. A flame retardant version (UL94 V0) is also available (see on the picture below).

Clip-on emi gasket flame retardent
Flame retardant version
Clip-on Gasket with water seal
Clip-on gasket with water seal
Clip-on Gasket with water seal
Clip-on gasket with water seal

Dimensions

EMI clip-on gasket Technical drawing dimensions 6500 
Technical drawing dimensions 6500
ProfileABCD
(mm)(mm)(mm)(mm)
6580 15 14 16 0.5 - 3.0
6585 9 16 9 0.5 - 2.0
6590 10 21 11 1 - 3
6595 9.5 9 8.7 0.5 - 2.0

Standard shapes

6590 Big clip-on shield 
6590 Big clip-on shield
6585 Small clip-on shield  
6585 Small clip-on shield
6595 Side clip-on shield 
6595 Side clip-on shield
6580 Big Side clip-on shield 
6580 Big side clip-on shield

* The table above shows our standard shapes which can be delivered from stock. However, we can also supply 264 other shapes of Clip-on EMI/RFI shielding gaskets. Please click here to find all possible shapes available.


Shielding performance

Shielding effectiveness depends on surface, shape of gasket and materials used.


Frequency HzModeAttenuation dB
1M E 121
10M E 110
100M E 103
400M E 98
1G P 93
10G P 90
These values were measured under laboratory conditions.
Results may differ in other situations; please read our Guarantee.
In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: 6500 series - Clip-on gasket standard shapes (20)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

6500 Clip-on gasket with water seal| Holland Shielding Systems B.V. 6500 Holland Shielding Systems BV 6500 Clip-on gasket with water seal| Holland Shielding Systems B.V. Holland Shielding Systems B.V. Holland Shielding Systems B.V. Shielding gaskets > EMI/IP gaskets
Rated 4.6/5 based on 11 customer reviews
In stock
48.00 48.00 48.00 EUR
48.00 48.00 48.00 Retail EA EUR
Shielding gaskets > EMI/IP gaskets 1 6500 Clip-on gasket with water seal| Holland Shielding Systems B.V. 6500 Holland Shielding Systems BV
Product description: Composed of a separate sponge rubber water seal and an EMI-shielding side of highly conductive, wear-resistant metallized fabric.

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radio frequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: 0031782049000

Fax: 0031782049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

Would you like to...

Technical datasheets

To get a quotation for Clip-on gasket standard shapes within 24 hours fill in the form below.

Select an option:
6585 : Small clip-on shield
6590 : Big clips-on shield
6595 : Side clip-on shield
6580 : Big side clip-on shield
* Note: The red blocks are required