8215 - HDMI cable connector shield
Easy to be stuck to any HDMI connector to create a high shielding performance HDMI cables
A HDMI cable in or outside electronics housing often leads to interference.
Now we have developed a HDMI cable connector shield that is very easy to be stuck to any connector of a HDMI cable. With this shield the cable including the connector can be fully shielded to get the best shielding performance.
Most sizes are available from stock but the shield can be produced in any dimension. The shields can also be manufactured according to your drawing.
Shielding performance can even be improved using optional grounding connections or by using multiple layers, or multiple HDMI connector shields stuck over each other.
- Very high shielding performance
- Available for any connector
- Easy to mount
- Good connection to the shield of the cable
Options (on request)
- Can be equipped with grounding strip for better performance
- Performed in an Amucor execution
Standard part numbers
The HDMI connector shield is so developed that it has a fairly large overlap. This makes the shield almost suitable for any HDMI connector. The standard part number for an HDMI cable connector shield is 8215. Any custom sizes/part numbers on request.
To get a quotation for HDMI cable connector shield within 24 hours fill in the form below.