7200 series P-shape EMI shielding gaskets

Conductive fabrics with Ni/Cu-layer over P-shaped sponge core (elastomer core)

7200 series P-shape EMI shielding gaskets consists of a P-shaped closed cell foam core which is covered with a conductive fabric with a copper-nickel metal coating (material code T) or highly conductive Amucor foil (material code A) .

P-shape EMI shielding gasket comes with a self-adhesive strip for easy mounting.

The version with highly conductive Amucor foil (material code A) is designed especially to be combined with aluminium and zinc-plated steel.

Our 7200 series P-shape EMI shielding gaskets  continuous strip gaskets have excellent shielding effectiveness (SE), high durability, low compression set and low resistance.

7200 series P-shape EMI shielding gasket
7200 series P-shape EMI shielding gasket

Applications

  • Displays
  • Metal housings
  • Switching cabinets
  • Depending on the application an IP54 protection class could be reached, that means by the use of the shielding gasket a protection against dust (index 5) and protection against splashed water (index 4)
    could be offered

Characteristics

Conductive fabrics with Ni/Cu-layer. A PU sponge core (elastomer) covered with electro conductive fabric

  • Shielding Effectiveness:  > 85dB attenuation from 20 MHz to 10 GHz
  • Electrical Resistance:  < 0.1 Ohms/Sq
  • Compression Deflection:  < 1 lb/in
  • Compression Set:  15-19 percent
    • 15 percent at 70 °F. (21 °C.)
    • 19 percent at 158 °F. (70 °C.)
  • Service Temperature -40 °F. (-40 °C.) to 158 °F. (70 °C.)

Standard sizes

Below is a table of standard sizes that are nearly always in stock. Other sizes can all be produced on request.

P-shape EMI shielding gasket round shaped technical drawing
P-shape EMI shielding gasket round shaped technical drawing
P-shape EMI shielding gasket square shaped technical drawing
P-shape EMI shielding gasket square shaped technical drawing
Part number Height (mm) Width (mm)
7238 3 8
7248 4 8
72410 4 10
72412 4 12
72610 6 10
72612 6 12
72614 6 14
72812 8 12
72814 8 14
72816 8 16
72xx Custom Custom

Comments

  • The 7200 series P-shape EMI shielding gaskets was developed to solve diverse EMI/RFI situations  where a lightweight solution with excellent shielding properties and surface conductivity where required.
  • Shielding of over 80 dB @ 100 MHz can be reached very easily by using these shielding gaskets.
  • 7200 series P-shape EMI shielding gaskets has the following composition:
    • PU sponge (thermoplastic rubber), enclosed in an electro conductive fabric weaved from nickel-copper-polyester.
  • Flammability class: UL94-V0
  • All standard profiles are self-adhesive and have a removable protective cover tape.
  • We provide these products from stock. Non-conductive adhesive tape is used as standard.
  • Customer-specific lengths and stamped out patterns can be carried out on request.
7200 - P-shape EMI shielding gaskets | Holland Shielding Systems BV 7200 Holland Shielding Systems BV 7200 - P-shape EMI shielding gaskets | Holland Shielding Systems BV Holland Shielding Systems B.V. Holland Shielding Systems B.V. Shielding gaskets > EMI gaskets
Rated 4.1/5 based on 11 customer reviews
In stock
48.00 48.00 48.00 EUR
48.00 48.00 48.00 Retail EA EUR
Shielding gaskets > EMI gaskets 1 7200 - P-shape EMI shielding gaskets | Holland Shielding Systems BV 7200 Holland Shielding Systems BV
Product description: 7200 - P-shape EMI shielding gaskets | EMI/RFI shielding product & solutions, common for in-stock products. Worldwide support for industries.

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radio frequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: 0031782049000

Fax: 0031782049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

Would you like to...

  • get a quote?
  • ask a question?

To get a quotation for P-shaped EMI shielding profile within 24 hours fill in the form below.

Select your part number from the part number table above. When you need a 4 x 8 mm profile, the required part number is 7248
Select an option:
01 : Standard self-adhesive placed in the middle
02 : Without self-adhesive
03 : With conductive self-adhesive (only recommended on small sizes)
06 : Stand self-adhesive asymmetrical
Select an option:
N : Standard neoprene foam
E : EPDM foam core
P : Low closure force PVC foam, slow recovery
F : Flame retardant UL94V-0 foam
Select an option:
R : Round shaped
S : Square shaped
* Note: The red blocks are required