5750-P series - Electrically conductive rubber profiles

Electrically conductive rubber profiles in general are known for its excellent weather, oxidation and ozone resistance. In EMI shielding, this rubber in particular is used as a medium to provide electrical conductivity across a gasket-flange interface.

The rubber in these profiles is made conductive by means of small conductive metal particles, distributed throughout the rubber. It can provide an EMI-proof and a pressure watertight seal in narrow constructions.

Electrically conductive rubbers are typically used for EMI applications. Also used for EMP protection, wave-guide applications and against static electricity. The rubber can be filled with silver, nickel, silvered glass, silvered aluminium or graphite (only for ESD). Commercial EMI applications often call for Nickel-Graphite Conductive Rubber (Partnumber 5760) or Graphite Conductive Rubber (Partnumber 5755) due to costs, whereas military and aerospace applications often call for Silver Aluminium Silicone Conductive Rubber (Partnumber 5750) to meet Mil-G-83528C specifications. In military or aerospace, fluorosilicone versions may also be used for its chemical and fuel resistance.

As the material shields high frequencies, electrically conductiver rubber shows a shielding effect of 60 dB at 30MHz ~ 10GHz. Due to its excellent conductivity, grounding and EMI shielding effect, it is well suited for military communication equipment. The rubber can be manufactured in various shapes such as sheets, moulded parts, die-cut, strips, o-rings, etc.

Electrically conductive rubber profiles come in different shapes and sizes
Electrically conductive rubber profiles come in different shapes and sizes

Benefits

  • Excellent conductivity throughout the surface
  • Excellent electromagnetic shielding effect
  • Easy die-cutting, kiss-cutting and slitting
  • Temperature range -60 to +185 ºC (under certain circumstances, tolerance can be up to 220ºC)

Conductive adhesive information (Conductive PSA)

PropertyUnit Outcome Test method
Surface resistanceΩ/sq <0.10 MIL-DTL-83528C
Adhesive strengthg/25mm 850 ASTM D 3330
Conductive PSA- Acrylic + Ni -
Liner- paper, Film -

* Please note: Conductive adhesive is optional. By default, these Conductive rubber gaskets are supplied without adhesive.

Standard profile sizes

Conductive P-profile (P)

P-Profile technical drawing
P-Profile technical drawing
Part numberA (mm)B (mm)C (mm)D (mm)Size number
X-P-5.0/2.0/1.6/12.7-X 5.0 2.0 1.6 12.7 5.0/2.0/1.6/12.7
X-P-5.0/2.0/1.6/21.6-X 5.0 2.0 1.6 21.6 5.0/2.0/1.6/21.6
X-P-6.4/3.2/1.6/12.7-X  6.4 3.2 1.6 12.7 6.4/3.2/1.6/12.7
X-P-6.4/3.2/1.6/15.9-X  6.4 3.2 1.6 15.9 6.4/3.2/1.6/15.9
X-P-6.4/3.2/1.6/22.2-X 6.4 3.2 1.6 22.2 6.4/3.2/1.6/22.2
X-P-7.9/4.8/1.6/22.2-X 7.9 4.8 1.6 22.2 7.9/4.8/1.6/22.2
X-P-9.1/6.5/1.8/19.8-X  9.1 6.5 1.8 19.8 9.1/6.5/1.8/19.8

The X in the part number must be replaced for the desired series (5750, 5760 or 5755) and optionally the desired tape code


Conductive hollow D profile (D)

Hollow D profile technical drawing
Hollow D profile technical drawing
Part numberA (mm)B (mm)C (mm)R (mm)Size number
X-D-4.0/4.0/1.1/2.0-X 4.0 4.0 1.1 2.0 4.0/4.0/1.1/2.0
X-D-4.8/4.7/1.3/2.4-X 4.8 4.7 1.3 2.4 4.8/4.7/1.3/2.4
X-D-6.4/6.4/1.7/3.2-X 6.4 6.4 1.7 3.2 6.4/6.4/1.7/3.2
X-D-7.9/7.9/1.3/4.0-X 7.9 7.9 1.3 4.0 7.9/7.9/1.3/4.0
X-D-12.4/8.2/2.0/6.2-X 12.4 8.2 2.0 6.2 12.4/8.2/2.0/6.2

The X in the part number must be replaced for the desired series (5750, 5760 or 5755) and optionally the desired tape code


Conductive solid D profile

Solid D profile technical drawing
Solid D profile technical drawing
Solid D : (Profile SD)
A (mm)B (mm)Size number
1.6 1.4 1.6-1.4
1.7 1.6 1.7-1.6
2.0 2.4 2.0-2.4
2.3 2.0 2.3-2.0
2.5 1.6 2.5-1.6
2.8 3.2 2.8-3.2
3.4 3.1 3.4-3.1
4.0 3.0 4.0-3.0
4.5 4.5 4.5-4.5
4.8 4.8 4.8-4.8
6.4 6.4 6.4-6.4

U channel profile

U channel technical drawing
U channel profile technical drawing
U channel : (Profile U)
A (mm)B (mm)C (mm)R (mm)Size number
2.4 2.5 0.9 0.8 2.4-2.5-0.9-0.8
3.2 2.8 0.7 1.3 3.2-2.8-0.7-1.3
3.2 5.7 0.5 1.9 3.2-5.7-0.5-1.9
4.0 4.0 1.6 1.2 4.0-4.0-1.6-1.2
4.5 4.0 1.2 1.9 4.5-4.0-1.2-1.9
8.3 6.0 1.6 2.9 8.3-6.0-1.6-2.9

DD profile with waterseal

DD profile with waterseal technical drawing
DD profile with waterseal technical drawing

Please note. The DD profile with water seal is delivered in a standard size, see above technical drawing. Other dimensions on request.

U channel : (Profile U)
A (mm)B (mm)C (mm)Size number
4.5 4.75 1.65 4.5-4.75-1.65

Benefits

  • No reduction of the shielding properties in the splicing area
  • Splicing rubber thin and conductive
  • No flash, porosity or excess rubber at the joint after splicing
  • Max increase of compression force in the splicing area 5%
  • No excess splicing rubber inside hollow profiles
  • Jointing point should stand for 10% stretch without mechanical damage
  • Electrical resistance measure: Max 300 mOhm
  • Available in rolls up to 1000 meters
Image of a DD profile with waterseal
Image of a DD profile with waterseal

O-profiles

Our conductive rubber o-profiles are listed in a separate product series, the 7900 series. Are you looking for a conductive rubber o-profile, please refer to this page.

7900 series Conductive rubber o-profiles
7900 series Conductive rubber o-profiles

Technical properties

Typical properties575057555760
Filler Ag/Al Graphite Ni-Graphite
Base polymer Silicone Silicone Silicone
Width (mm) 210 x 300 (Bigger sizes on request)
Thickness (mm) 0.2 to 3 (Thicker on request)
Elongation, %, min. 90 50 50
Flame resistance, UL94 (Horizontal) HB HB HB
Flame resistance, UL94 (Vertical) V-0 V-0 V-0
Volume resistance, Ohm-cm
(expression of conductivity)
0.008 1.8 0.05
Hardness:575057555760
Shore A (1 mm thickness): 73 71 70
Shore A (2 mm thickness) 70 75 60
Tensile strength. psi, min. 90 50 50
Shielding effectiveness (dB)575057555760
100 MHz 120 70 100
500 MHz 120 70 100
1 GHz 110 80 110
10 GHz 85 55 85
These values are measured under laboratory conditions. In your situation results may differ, please read our Guarantee.

What questions need to be answered to pick the right material?

  1. What is the approximate shielding effectiveness you need to achieve for your application?
  2. What environment will this material be exposed to? Does the rubber need to be solvent or fuel resistant (Fluorosilicone)?
  3. Are you looking for a semi-conductive/static dissipating material or is this a true EMI/RFI shielding application?

How is the conductive filler material in the rubber connected to costs and performance?

Part number Conductive filler Cost Conductivity Typical shielding effectiveness*
5750 Silver plated aluminum $$$ Extremely conductive 120 dB
5760 Ni-Graphite $$ Super conductive 100 dB
5755 Graphite $ Very conductive 70 dB

* More information about shielding performance can be found at "technical properties" (a few chapters above)


Special materials (on request)

These Conductive Rubber Profiles are also available in special materials for special applications for example applications with chemicals. Below is a list of special materials. For availability and delivery please email info@hollandshielding.com.

  • Silicone Carbon
  • Fluorosilicone Nickel Graphite
  • Silicone Nickel Graphite Flame Retardant
  • Silicone Silver Aluminium
  • Fluorosilicone Silver Aluminium
  • Fluorosilicone Nickel
  • Silver Plated Nickel
  • Silver Glass

Electrically conductive rubber is available as:

  • Sheets
  • Moulded parts
  • Die-cut, or flash cut
  • Strip
Electrically conductive rubber profiles, Nickel-Graphite, Silver, copper 5750-P Holland Shielding Systems BV Electrically conductive rubber profiles, Nickel-Graphite, Silver, copper Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.2/5 based on 6 customer reviews
In stock
48.00 48.00 48.00 EUR
48.00 48.00 48.00 Retail EA EUR
1 Electrically conductive rubber profiles, Nickel-Graphite, Silver, copper 5750-P Holland Shielding Systems BV
Product description: Conductive rubber containes small conductive metal particles, distributed throughout the rubber providing an EMI-proof & pressure watertight seal.

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radio frequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: 0031782049000

Fax: 0031782049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

Would you like to...

To get a quotation for Conductive rubber profiles within 24 hours fill in the form below.

Select an option:
5750 : Silver plated aluminium
5760 : Ni-graphite
5755 : Graphite
Select an option:
P : P Profile
D : Hollow D profile
SD : Solid D profile
U : U channel profile
R : Rectangular profile
DD : DD profile with water seal
See profile part numbers tables above
Select an option:
02 : Without self-adhesive
03 : With conductive self-adhesive (only recommended on small sizes)
* Note: The red blocks are required