3203 - Aluminium tape
Developed especially for EMI/RFI shielding/screening in aluminium housings and frames to prevent galvanic corrosion.
Aluminium tape was developed especially for EMI/RFI shielding/screening in aluminium housings and frames to prevent galvanic corrosion.
We not only produce our aluminium tape on rolls, but also die-cut according to the customer's drawing on strips or in pieces (as stickers), both with or without self-adhesive.
Technical specification and part numbers
(with conductive adhesive)
(with standard adhesive)
|Foil thickness||0.040 mm|
|Total thickness||0.065 mm|
|Adhesive||Synthetic conductive resin|
|Adhesive performance||4.5 N/cm|
|Tensile strength||25 N/cm|
|Temperature resistance||155 °C|
|El. resistance through adhesive||0.003 Ohm|
|Standard roll widths (mm)*||10, 25, 50, 100|
|Roll lengths*||16.5 m|
|These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.
To get a quotation for Aluminum tape within 24 hours fill in the form below.