Transparent EMI/RFI-shielding foil
Transparent shielding foil with speciality of one side conductive meanwhile optical transmittance, is widely used for applications of EL panel, LCD EMI shielding, touch screeen, flexible solar cell etc.
Transparent EMI/RFI-shielding foil 9900 series is a polyester film with a transparent conductive coating. The foil provides excellent electric and eletromagnetic shielding of 40-70 dB at 10 Khz to 300 Mhz and 25-40 dB from 300 MHz to 22 Ghz.
In addition to EMI/RFI/EMC shielding it is also used for grounding and static discharge applications. Typical applications are transparent shielding panels for visual displays in instrumentation equipment, control panels and computers. The light transmission is 65-95%, depending on the electrical conductivity (20-5 Ohm/sq).
Due to its transparency, Transparent EMI/RFI-shielding foil 9900 series is the optimal choice for optical clarity.
For TEMPEST sites or radar/telecom protection, large dimensions are available.
If you have a drawing of a specific shape you require, please send it to firstname.lastname@example.org for a quotation.
9900 series - Transparent shielding foil 30 MHz - 3 GHz
9900 series - Transparent shielding foil 1GHz - 22 GHz
Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.
|Sheet style #1STD
Standard transparent EMI-shielding foil. No extra contact edge. There is electrical conduction on the top side of the foil.
|Sheet style #2BAR
Transparent EMI-shielding foil with silver busbar.
|Sheet style #3CAR
Transparent EMI-shielding foil with copper edges for grounding.
A connection can be made between the conductive side of the Transparent EMI/RFI-shielding foil 9900 series and a conductive mounting surface of the construction with Shielded tape 3201 or it can be clamp mounted with Ultra soft shield 7400.
iTO Film with high light transmittance is used as the transparant conductive layer for transmitting electron.
Please note: the top layer of the film can be affected by acids, for example from the skin. To protect the conductive layer, you can apply a transparent film or use the adhesive side on top.
Small optical defects are allowed in this product. If you require a foil that is absolutely free from optical defects, feel free to contact us for the "superior selected quality". Please realize that due to the extreme caution needed to manufacture these products, they can be several times more expensive.
To get a quotation for Transparent shielding foil within 24 hours fill in the form below.