2100 series Clip-on mounting fingerstrips

This simple clamping system is suitable for sealing gaps between an EMI/RFI-shielded door and its doorframe. and similar applications.

The 2100 series is designed for use where high temperatures or other design considerations preclude the use of adhesive-mounted gaskets. These fingerstrips provide the same shielding characteristics and effectiveness as the 2300 series Stick-on mounting fingerstrips, i.e. >100dB for the 100 MHz plane wave.

The contact edge of this Fingerstrip series expands and it has a low to high deflection (see technical drawings below).

For applications where a small dynamic range is required and a spring-clip mounting is preferred. Fingerstrips from this series are easy to mount by simply clipping them on or over the edge where they are to be attached by pressing / sliding (see picture below).

Items in bold type are stock items.


Clip-on 2101

For certain applications where the direction of the contact lies in the opposite direction of the clamp. 

2101 Clip-on mounting fingerstrip for EMI shielding, technical drawing
2101 Technical drawing
Part numberBCDFGHMaterial thickness
2101-01 5.1 9.5 1.5 406* 6.4 5.3 0.13 mm
2101-02 6.9 9.5 1..5 406* 6.4 5.3 0.13 mm
2101-03 5.1 9.5 1.5 406* 6.4 5.3 0.13 mm
2101-04 7.9 9.5 1.5 406 6.4 5.3 0.13 mm

* Also available in a length of 610 mm (on request)

Material: Beryllium-copper

2100 series Clip-on mounting fingerstrips - a simple clamping system
2100 series Clip-on mounting fingerstrips used in a metal Faraday cage box hatch
2100 series Clip-on mounting fingerstrips - a simple clamping system

Clip-on 2102

Clip-on with many small contact fingers to facilitate contact with an uneven surface. The small contact points make this a dynamic fingerstrip that easily adapts to the contact surface.

2102 Technical drawing
2102 Technical drawing
Part numberACDEFGHMaterial thickness
2102-01 11.4 6.9 1.0 2.5 407 4.8 3.6 0.1 mm
2102-02 11.4 6.4 1.5 2.5 407 4.8 3.6 0.1 mm
2102-03 11.4 5.8 2.0 2.5 407 4.8 3.6 0.1 mm

Material: Beryllium-copper


Clip-on 2103

2103 Technical drawing
2103 Technical drawing
Part numberACDEFGHMaterial thicknessCompression
2103-01 27.0 7.7 2.0 6.9 494 9.5 8.5 0.13 mm  
2103-02 27.7 6.6 2.3 6.6 457 9.5 8.7 0.13 mm 25% 24 kg/m
50% 63 kg/m
2103-03 27.7 6.6 3.2 6.6 457 9.5 8.7 0.13 mm 25% 24 kg/m
50% 63 kg/m

Material: Beryllium-copper


Clip-on 2104

2104 Technical drawing
2104 Technical drawing
Part numberABCDFGHMaterial thickness
2104-01 11.7 1.0 6.1 3.0 457 6.4 5.9 0.08 mm
2104-02 11.7 1.5 5.6 3.0 457 6.4 5.9 0.08 mm
2104-03 11.7 2.0 5.1 3.0 457 6.4 5.9 0.08 mm
2104-04 19.3 1.0 7.4 6.4 457 9.5 9.0 0.08 mm
2104-05 19.3 1.5 6.9 6.4 457 9.5 9.0 0.08 mm
2104-06 19.3 2.0 6.4 6.4 457 9.5 9.0 0.08 mm
2104-07 19.3 3.0 5.3 3.5 457 9.5 9.0 0.08 mm
2104-08 1.7 0.8 6.6 3.1 406 6.4 5.7 0.08 mm
2104-09 10.7 1.0 6.6 3.1 406 6.4 5.7 0.08 mm
2104-10 10.7 1.5 6.6 3.1 406 6.4 5.7 0.08 mm
2104-11 16.3 1.5 4.5 5.6 457 9.5 8.7 0.08 mm

Material: Beryllium-copper


Clip-on 2105

These fingerstrips combine high dynamic deflection with very low compression force and a long life span. After repeated compression the strip retains its resilience while keeping a firm grip on the mounted section. This makes it ideal for situations where adhesive bonding is not required.

Simple. rapid clamp construction.

2105-01 to 105-04,2105-21 Technical drawing
2105-01 to 2105-04, 2105-21 Technical drawing

2105-05 to 2105-08 Technical drawing
2105-05 to 2105-08 Technical drawing

2105-09 to 2105-10 Technical drawing
2105-09 to 2105-10 Technical drawing

2105-11 to 2105-15, 2105-20, 2105-24 to 2105-28 Technical drawing
2105-11 to 2105-15, 2105-20, 2105-24 to 2105-28 Technical drawing

2105-16 to 2105-17 Technical drawing
2105-16 to 2105-17 Technical drawing

2105-18 to 2105-19 Technical drawing
2105-18 to 2105-19 Technical drawing

2105-22 Technical drawing
2105-22 Technical drawing

Part numberABCDFGHMaterial thickness
2105-01 6.9 0.8 7.1 2.3 406 6.4 5.6 0.15 mm
2105-02 6.8 1.0 7.1 2.5 406 6.4 5.6 0.15 mm
2105-03 6.7 1.0 7.0 2.3 406 6.4 5.6 0.15 mm
2105-04 6.6 1.0 7.1 1.6 409 6.4 5.6 0.15 mm
2105-05 7.6 1.0 5.4 2.5 406 4.6 3.5 0.13 mm
2105-06 7.9 0.8 4.8 2.9 406 4.8 3.6 0.13 mm
2105-07 7.9 1.0 7.8 2.9 406 4.8 3.6 0.13 mm
2105-08 7.9 1.5 4.8 2.9 406 4.8 3.6 0.13 mm
2105-09 7.9 1.3 4.8 1.3 406 4.6 3.4 0.13 mm
2105-10 7.9 1.5 4.8 4.0 406 4.6 3.4 0.13 mm
2105-11 10.8 0.8 4.9 3.5 406 4.8 3.6 0.13 mm
2105-12 10.5 1.5 4.4 3.5 406 4.8 3.6 0.13 mm
2105-13 10.7 1.0 4.8 2.3 406 4.8 3.6 0.13 mm
2105-14 10.7 1.3 4.8 2.3 406 4.8 3.6 0.13 mm
2105-15 10.7 1.5 4.8 2.3 406 4.8 3.6 0.13 mm
2105-16 15.2 1.0 4.8 6.2 406 4.6 3.6 0.13 mm
2105-17 15.2 1.5 4.8 6.7 406 4.6 3.6 0.13 mm
2105-18 14.7 0.8 4.8 4.2 406 4.8 3.6 0.13 mm
2105-19 14.0 1.0 5.1 4.2 406 4.8 3.6 0.13 mm
2105-20 15.6 1.5 7.5 5.8 406 4.8 3.6 0.10 mm
2105-21 6.2 1.5 7.1 1.6 406 4.8 3.6 0.15 mm
2105-22 11.4 1.8 4.9 2.5 406 4.8 3.6 0.08 mm
2105-23 14.1 1.5 4.8 5.7 406 4.8 3.6 0.13 mm
2105-24 10.7 1.8 4.8 5.8 406 4.8 3.6 0.13 mm
2105-25 10.7 1.0 4.8 3.1 406 4.8 3.6 0.13 mm
2105-26 10.7 1.5 4.8 3.1 406 4.8 3.6 0.13 mm
2105-27 10.7 2.4 4.8 3.1 406 4.8 3.6 0.13 mm
2105-28 10.7 1.3 4.8 3.6 406 4.8 3.6 0.13 mm

Material: Beryllium-copper


Clip-on 2106

2106 Technical drawing
2106 Technical drawing
Part numberABCDFGHMaterial thickness
2106-01 15.2 1.0 7.4 5.3 406 4.8 3.6 0.1 mm
2106-02 15.2 1.5 6.9 5.3 406 4.8 3.6 0.1 mm
2106-03 15.2 2.0 6.4 5.3 406 4.8 3.6 0.1 mm
2106-04 8.3 1.0 6.3 2.5 406 4.8 3.6 0.1 mm
2106-05 8.3 1.5 5.8 2.5 406 4.8 3.6 0.1 mm
2106-06 8.3 2.0 5.4 2.5 406 4.8 3.6 0.1 mm

Material: Beryllium-copper


Clip-on 2107

2107 Technical drawing 
2107 Technical drawing
Part numberABCDFGHMaterial thickness
2107-01 4.6 1.0 3.8 2.3 305 3.2 2.8 0.08 mm
2107-02 4.6 1.5 3.4 2.3 305 3.2 2.8 0.08 mm
2107-03 12.3 1.0 8.3 7.2 406 4.8 3.2 0.15 mm
2107-04 12.3 1.5 7.6 7.2 406 4.8 3.2 0.15 mm
2107-05 12.3 2.0 7.6 7.2 406 4.8 3.2 0.15 mm
2107-06 12.3 3.0 6.3 7.2 406 4.8 3.2 0.15 mm

Material: Beryllium-copper


Clip-on 2108

2108 Technical drawing
2108 Technical drawing
Part numberABCDFGHMaterial thickness
2108-01 6.1 1.0 5.3 2.8 406 1.6 1.1 0.08 mm
2108-02 6.1 1.5 4.8 4.1 406 1.6 1.1 0.08 mm
2108-03 9.1 1.0 6.9 4.1 406 1.9 1.3 0.13 mm
2108-04 9.1 1.5 6.9 4.1 406 1.9 1.3 0.13 mm
2108-05 9.1 2.0 5.6 5.1 406 1.9 1.3 0.13 mm
2108-06 9.4 1.0 6.9 5.1 406 2.4 1.6 0.15 mm
2108-07 9.4 1.5 6.4 5.1 406 2.4 1.6 0.15 mm
2108-08 9.4 2.0 5.6 5.1 406 2.4 1.6 0.15 mm
2108-09 9.4 3.0 4.6 5.1 406 2.0 1.5 0.15 mm

Material: Beryllium-copper


Clip-on 2109

2109 Technical drawing
2109 Technical drawing
Part numberABCDFGHMaterial thickness
2109-01 4.8 0.8 3.0 1.3 305 4.2 3.8 0.08 mm
2109-02 4.8 1.0 2.8 1.3 305 4.2 3.8 0.08 mm
2109-03 4.8 1.5 2.3 1.3 305 4.2 3.8 0.08 mm

Material: Beryllium-copper


Clip-on 2110

2110 Technical drawing
2110 Technical drawing
Part numberABCDFGHMaterial thickness
2110-01 10.5 6.5 8.1 2.0 405 4.8 3.2 0.13 mm
2110-02 10.5 6.5 7.4 2.0 405 9.6 8.0 0.13 mm
2110-03 10.5 6.5 8.1 2.0 405 4.8 3.2 0.13 mm
2110-04 10.7 6.4 10.7 2.0 406 4.8 3.2 0.13 mm

Material: Beryllium-copper


Clip-on 2111

2111 Technical drawing
2111 Technical drawing
Part numberABCDFGHMaterial thickness
2111-01 8.4 4.2 6.5 0.8 405 4.6 3.6 0.13 mm
2111-02 8.1 4.2 6.5 1.0 405 4.6 3.6 0.13 mm
2111-03 8.2 4.2 6.5 1.5 405 4.6 3.6 0.13 mm

Material: Beryllium-copper


Clip-on 2112

2112-01 to 2112-04 Technical drawing
2112-01 to 2112-04 Technical drawing

2112-05 Technical drawing

2112-05 Technical drawing

Part numberABCDFGHMaterial thickness
2112-01 10.5 3.0 5.7 0.8 409 6.3 5.7 0.06 mm
2112-02 10.5 3.0 5.5 1.0 409 6.3 5.7 0.06 mm
2112-03 10.5 3.0 5.3 1.5 409 6.3 5.7 0.06 mm
2112-04 10.0 3.0 5.2 1.5 409 6.3 5.7 0.06 mm
2112-05 16.3 5.4 5.6 1.5 455 9.5 8.7 0.10 mm

Material: Beryllium-copper


Benefits of 2100 series Clip-on mounting fingerstrips

  • Low compression force
  • 100% recovery of original height at up to 60% compression
  • "D" lance for extra holding power
  • Optimum conductivity and mechanical properties of beryllium-copper
  • High cycle life (50.000 cycles without fracture)

 

Clip-on mounting fingerstrips to seal gaps between shielded door and frame 2100 Holland Shielding Systems BV Clip-on mounting fingerstrips to seal gaps between shielded door and frame Holland Shielding Systems B.V. Holland Shielding Systems B.V. Shielding gaskets > Fingerstrips
Rated 4.5/5 based on 15 customer reviews
In stock
48.00 48.00 48.00 EUR
48.00 48.00 48.00 Retail EA EUR
Shielding gaskets > Fingerstrips 1 Clip-on mounting fingerstrips to seal gaps between shielded door and frame 2100 Holland Shielding Systems BV
Product description: For applications where a small dynamic range is required and a clip-on mounting is preferred. Simple clip-on installation for door jambs and similar needs

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radio frequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: 0031782049000

Fax: 0031782049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

To get a quotation for Clip-on fingerstrips within 24 hours fill in the form below.

Choose part number from the tables above
* Note: The red blocks are required