Faraday cages, EMI/RFI-shielded tents, rooms and shielded enclosures
We specialize in designing and building Faraday cages, EMI/RFI-shielded rooms, TEMPEST material for encrypted announcements/communications, EMI/RFI-shielded tents and other shielding materials.
We have decades of experience in constructing the following shielded rooms and components:
- Faraday cages
- Faraday tents
- EMI-shielded chambers
- TEMPEST chambers/rooms
- Magnetic shielding for low frequencies
- TEMPEST equipment for encrypted communications
- Power and signal line filters
- EMP/EMI/RFI-shielded doors
- EMI/RFI-shielded windows
- Honeycomb ventilation panels
- and much more ...
Overview of shielding performance Faraday cages
To determine which type of shielded room you need, below you will find a graph showing the respective shielding performances of a high-performance prefabricated cage, a Mu-copper cage, a magnetically shielded room and two tents (one with a single layer and one with a double layer). The graph shows the attenuation for each type of Faraday cage at different frequencies. What is important when choosing your Faraday cage is the required attenuation (emission reduction) and of course the frequency ranges for which attenuation is desired. Higher attenuation equals higher emission reduction.
The performance of the cageApart from the fact that the Faraday cage and its door should operate in the same frequency range in order to yield the desired reduction, other components like power-line filters, honeycomb ventilation panels and screened windows should also operate in the same frequency range.
EMC compatibility standards
We can make sure your situation will comply with any national or international EMC regulations.
If you would like to receive our brochure and sample package, including a sample of the "Mu-copper wallpaper system", please go to our Sample request form or contact us by telephone: +31(0)-78-613 1366 or email: email@example.com .
Determine which type of shielded room you need
To determine which Faraday cage you need for your application we have made a chart showing why all the different types of cages. On the basis of your desired attenuation in dB, you can determine which Farada cage is suitable for your application.
Faraday cage selection graph
Deze container niet bewerken s.v.p.
Grafiek: Faraday cage selection graph (42)
Please note : These values are measured under laboratory conditions.
Results may vary in other situations; please read our Guarantee.
EMC-shielded rooms and environment solutions
We produce Faraday cages, shielded chambers and all other components needed to construct shielded rooms, such as:
- Power & signal line filters
- Wave guides
- Shielded doors
- EMI/RFI-shielding windows
- Shielded ventilation panels
- and much more
In addition we produce TEMPEST equipment for encrypted communications, and even welded EMP bunkers. We also design new shielding products according to the client's wishes with very short delivery times.
We assist our clients from the design phase through the construction phase, so our engineers are ready to advise you at any step in the process to achieve the optimal solution.