Metal cabinets, (19") Racks and enclosures

EMI shielding metal racks and enclosures

Metal cabinets, (19”) Racks and shielded enclosures

As one of the world’s most well-known specialists in the field of EMI shielding and the widest range of shielding products in the world, we are able to offer our customers very good shielded enclosures from stock as well as specially tailored for our customer.


Applications


How it is designed

We deliver relatively simple shielded boxes for small studies to large EMI and FCC heavy-duty Shielded enclosures.

Our EMI shielded racks are constructed of our patented Mu-ferro 6800 series plate material, which is galvanically perfectly compatible with our EMI shielding gasket
materials. This combination results in a very high shielding performance, also in the long term.

Our Shielded enclosures allow you to meet a wide variety of requirements for EMI/RFI suppression including:

  • Mil Spec 285
  • TEMPEST
  • FCC Part 15
  • European VDE

Our EMI & FCC product lines come in both vertical racks and sloped front consoles (15 & 30 degree). It is designed with double ledge, double plane corner construction which make it the strongest cabinet in the industry, capable of carrying up to 1400 kg of equipment.


EMI and FCC Heavy Duty Enclosures

Depending on the desired attenuation levels and frequency range the gasketing material for our racks can be beryllium copper spring-finges; Standard shield and/or ultra soft shield.

These gaskets are proven over a period of time, it is not affected by air, ozone, ultraviolet and nuclear radiation or solvents and can not flake or break into small conductive pieces that can short out electronics.

We have 6 different levels of attenuation. The most meet TEMPEST and EMP requirements. Additionally there are two stainless steel studs in the lower rear of frames to assist in grounding. Our most advanced product meets and exceeds the NSA 94-106 standard.

The FCC racks are made of 14 gauge steel. Silver braid gaskets are attached to the frame with a conductive, pressure sensitive adhesive. The gasket’s foam core offers low closure force. All surfaces of doors, panels and frames that come in contact with EMI gaskets have a metallized corrosion resistive surface. FCC racks provide versatility, reliability and cost efficiency while still meeting FCC, CE Mark or other commercial requirements.

EMI & FCC cabinets feature panel mounting angles made from 3/16” steel, 50% thicker than the average used in the industry. Horizontal support channels are removable because of the extreme strength of the frame. Positive door latching hardware, not magnetic or velcro stripping, is standard.


Standard Sizes

Standard Panel Heights:
534 mm to 2134 mm, in any 45 mm increment

Standard Depths:
43 mm, 61 mm, 74 mm and 92 mm

Standard Panel Widths:
48 mm, 61 mm, 76 mm, adapters are available for mounting 23” (58 mm) equipment


Attenuation Levels

FCC/VDE Shielded Cabinets
(Standaard cabinets, performance level 1)
Equipto FCC/VDE cabinets provide high attenuation at low cost. These cabinets can help ensure your equipment meets FCC/VDE or other EMI requirements for a variety of commercial and industrial applications. Modular construction ensures compatibility with our Heavy Duty and RFI Cabinets. Of course, all the benefits of our Heavy Duty Cabinets, such as 3,000 pound load capacity, make this a very cost effective shielded cabinet. Learn more...

EMI shielded Cabinets
(High performance cabinets, performance level 2)
Our high performance cabinets provide serious protection for EMI/RFI signal intrusions or leakage with sensitive equipment for RF to the microwave band. With shielding effectiveness of over 75 dB at 40 GHz, the enclosure provides essential defense against EMP weapons and geomagnetic storms that can ‘take out’ communication centers, power plants, surveillance systems and more.

The highest EMI/RFI protection available!
(Ultra high performance cabinets, performance level 3)
In the fields of intelligence and computer security, TEMPEST requirements, specifically NSA 94-106, is among the most stringent. Our latest Ultra high performance shielded cabinets are the electronics enclosure, developed by Equipto Electronics’ engineers, not only meets but far exceeds the NSA 94-106 standard.

The cabinets are custom sized to your requirements. You have options such as front and/or rear doors, panels or a combination of the two; adjustable vertical mounting rails with either punched, threaded or square holes and a wide variety of other accessories.


Options

Our shielded racks are designed to be modular and flexible, a wide variety of accessories are available.

  • Wide variety of Panels and Doors
  • Fixed, Sliding and Modem Shelves
  • I/O Panels
  • Storage and Equipment Drawers
  • Caster Bases, Caster Dollies and Trucks
  • Fans and Blowers for cooling
  • Chassis Guides and Supports
  • I/O compartments for panels
  • Copper Bus Bars
  • Plug Molds
  • With Shock and Vibration absorbers (tested to Mil-Std 810D, section 514.3-7,8 and 9, which simulates 20 years of rough service in a mobile application. This cabinet was also tested to Mil-Std 901 which simulates a 10g hammer hit.)
Full size shielded rack closed front view
Full size shielded rack closed front view
Full size shielded rack open front view
Full size shielded rack open front view
All shielded racks are equipped with shielded Honeycomb ventilation panels
All shielded racks are equipped with shielded Honeycomb ventilation panels
For extra power ventilation extra fans with shielded Honeycomb ventilation panels can be attached on the back of the rack
For extra power ventilation extra fans with shielded Honeycomb ventilation panels can be attached on the back of the rack
Each rack can be performed with the inputs and filters you need. Think of data connections such as USB and Ethernet, but also filtered power feeds for the device inside the racks.
Each rack can be performed with the inputs and filters you need. Think of data connections such as USB and Ethernet, but also filtered power feeds for the device inside the racks.
The rack door frame is equipped with resilient electrically conductive gaskets that ensure good contact between the door and the frame when closed.
The rack door frame is equipped with resilient electrically conductive gaskets that ensure good contact between the door and the frame when closed.
The glass in the door is equipped with a very fine electrically conductive mesh, which you can easily see through, but which guarantees a very good shield.
The glass in the door is equipped with a very fine electrically conductive mesh, which you can easily see through, but which guarantees a very good shield.

Shielding performance

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: Shielded racks (72)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

EMI shielded racks for server rooms Holland Shielding Systems BV EMI shielded racks for server rooms Holland Shielding Systems B.V. Holland Shielding Systems B.V. Faraday cages & shielded test boxes > Faraday cages and components
Rated 4/5 based on 8 customer reviews
In stock
48.00 48.00 48.00 EUR
48.00 48.00 48.00 Retail EA EUR
Faraday cages & shielded test boxes > Faraday cages and components 1 EMI shielded racks for server rooms Holland Shielding Systems BV
Product description: EMI shielded racks for server rooms

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radio frequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: 0031782049000

Fax: 0031782049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

Would you like to...

  • get a quote?
  • ask a question?

General documentation

To get a quotation for Full size shielded racks within 24 hours fill in the form below.

To make an offer for a shielded rack, we ask you to specify the desired performance and dimensions in the following blocks. Potential additional services such as filtering can be discussed later.

Series
Specify the width of the shielded rack in mm
Specify the length of the shielded rack in mm
Specify the height of the shielded rack in mm
Select an option:
1 : FCC/VDE Shielded Cabinets
2 : EMI shielded Cabinets
3 : The highest EMI/RFI protection available
* Note: The red blocks are required
Acceptable file extensions (preferred a PDF file)
.ai, .bmp, .cad, .doc, .docx, .dwf, .dwg, .dxf, .dxt, .eps, .gif, .icd, .idw, .ipn, .ipt, .jpeg, .jpg, .pdf, .png, .ppt, .pptx, .psd, .rar, .step, .svg, .tif, .tiff, .xls, .xlsx, .zip