Clip-on EMI/RFI shielding gaskets with water seal. These gaskets are also know as trim gaskets or trimshield gaskets.
This easily mounted clip-on gasket is composed of two layers: a sponge rubber water seal, and an EMI-shielding side of highly conductive, wear-resistant metallized fabric. The gasket is very flexible due to the hollow rubber, ensuring a low closure force.
The gasket is assembled without tools, simply by manually pressing the section onto the metal flange of your enclosure. Different sizes are available on request. The gasket can be bent in either direction (it can not be bent into a right angle, but it can form a rounded corner with a very small radius). Temperature ranges from -40 to +110°C. A flame retardant version (UL94 V0) is also available (see on the picture below).
|6580||15||14||16||0.5 - 3.0|
|6585||9||16||9||0.5 - 2.0|
|6590||10||21||11||1 - 3|
|6595||9.5||9||8.7||0.5 - 2.0|
* The table above shows our standard shapes which can be delivered from stock. However, we can also supply 264 other shapes of Clip-on EMI/RFI shielding gaskets. Please click here to find all possible shapes available.
Shielding effectiveness depends on surface, shape of gasket and materials used.
|Frequency Hz||Mode||Attenuation dB|
|These values were measured under laboratory conditions.
Results may differ in other situations; please read our Guarantee.
Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.
To get a quotation for Clip-on gasket standard shapes within 24 hours fill in the form below.