SuctionTack Clear is free of PVC, 100% recyclable and therefore environmental friendly. The base film is ultra-clear polyester. It is adhesive-free but sticks low-tack on glass and most other smooth surfaces. It will leave no residue after removing.
Point of Sale
Good weather resistant (no curling)
UV-Curable / UV Offset
Easy to install & remove, save time & labor cost.
Not affected by the temperature / humidity changed
Low-tack based on MicroSuction technology
Removable without residue or ghosting
Can be refreshed and reused easily
Basic installation instructions
The surface need to be clean and free of dirt.
For glass, varnished wood, metal, tiles, moisture the surface first before clinging.
Peel off 20cm (or depending on the size of the graphic) from one side and peeling the whole liner off gently while installing.
Carefully position the film so that it is properly aligned on all sides, then press the upper corners in place using light pressure.
Working from the top of the graphic to the bottom, continue by peeling away more of the liner until the liner is completely removed and the graphic is in place.
Use a damp cloth to remove air bubbles easily.
Face film thickness : 115 μm (±7) Basic weight : 155 g/m2 (±9)
Available widths × lengths
1270mm × 30m
500mm × 700mm
700mm × 1000mm
Condition of use/storage
The graphics can be repositioned up to 10 times at least, but make sure the MicroSuction layer is always free of dirt. Once any dirt on it, please use an adhesive tape to stick the dirt to renew for reuse
Best storage temperature 10 ﾟC to 22 ﾟC
Best storage humidity relative to 50%
Service temperature -4 ﾟC to +90 ﾟC
We recommend that you always keep this product in its original packaging when not in use.
Holland Shielding Systems B.V.Holland Shielding Systems B.V.
Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radiofrequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.