8050 series Power line filters for shielded cabinet

Designed for well grounded shielded cabinet with rated voltage of 250VAC/50Hz.
Shielding performance: 100dB @ 14KHz-40GHz (MIL-STD-285)

The 8050 series Power line filters for shielded cabinets is a superior filter housed in a two compartment casing that achieves 100 dB insertion transmission loss at 14 kHz till 40 GHz.The circuit is designed as a double- circuit with high quality rod cores providing inductanace. These cores do not saturate due to their large air gap and they are insensitive to asymmetrical load.

This series of power line filters is specially designed for well grounded shielded cabinet with rated voltage of 250VAC/50-60Hz. It is compact and in compliance with Class B and C standards for shielded cabinet. The 8050 series is particulary suitibel to be used on MRI rooms.

This series is only offered as a two line filter (phase and neutral).


Advantages

  • High attenuation level for lower frequencies
  • Suitable for use under extreme conditions (military applications)
  • Wear resistant
  • Insensitive for corrosion

Applications

  • Shielded rooms
  • Shielded chambers
  • Anechoic chmabers
  • Military applications
8050 series Power line filters for shielded cabinets
8050 series Power line filters for shielded cabinets

Product range

All power line filters mentioned above are intended to be placed before the earth leakage circuit breaker.
When you need a power line filter that you can place after the earth leakage circuit breaker,
you can use the LL version (8050-16-LL).

* These filters are available upon request.
Type IR (A) I Leakage (mA) * Outline drawing Shielding Effectiveness (dB)
8050-2-6 2×6 30 1 100dB, 14k-40GHz
8050-2-16 2×16 30 1
8050-2-20 2×20 30 1
8050-2-32 2×32 30 2
*8050-2-16-LL 2x16 3 1 See graph below
or
download technical datasheet
*8050-2-16-EP 2x16 <3 1  See graph below
or
download technical datasheet

*If voltage between neutral and earth is 0V


Shielding performance

8050 series - 8050-2-16-LL VS 8050-2-16-EP

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: 8050 series - 8050-2-16-LL VS 8050-2-16-EP (36)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

 


Dimensional diagrams

Diagram 1
Diagram 1
Diagram 2
Diagram 2

 

Power line filters for shielded cabinets Power line filters for shielded cabinets Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.9/5 based on 14 customer reviews
In stock
Product description: This series of power line filters are specially designed for well grounded shielded cabinet with rated voltage of 250VAC/50Hz.

Would you like to...

To get a quotation for Power line filters for shielded cabinet within 24 hours fill in the form below.

Series
Number of lines
Rated current (A)
Select an option:
6 : 6 ampere
16 : 16 ampere
20 : 20 ampere
32 : 32 ampere
* Note: The red blocks are required

1550

Conductive Foil PCB shielding Gaskets

P

Small pin (for 1500 series)

Shielding pouch

1100

Thermal grease

Low frequency shielded boxes

Shielded Balaclava